Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Tank

Front Fender

Rear Fender

Note: Some bubbles in the decal will occur when applying decals to plastic fuel tanks. Fuel vapour coming through from inside the tank will cause bubbles in any decal applied to said tank. To help minimise this bubbling effect BlackBird Racing decals come with small holes on the tank part to help prevent fuel vapour being trapped behind the decal.

Blackbird Racing Swingarm Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

Two swingarm are included. One for the left side and another for the right.

Pre-cut for perfect fit to the original swingarm of the bike

The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.

The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Tank

Front Fender

Rear Fender

Note: Some bubbles in the decal will occur when applying decals to plastic fuel tanks. Fuel vapour coming through from inside the tank will cause bubbles in any decal applied to said tank. To help minimise this bubbling effect BlackBird Racing decals come with small holes on the tank part to help prevent fuel vapour being trapped behind the decal.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Front Fender

Rear Fender

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Front Fender

Rear Fender

The Pyramid Seat Cover is the original gripper seat cover by BlackBird Racing and arguably the best.

The Pyramid Seat Cover is created using one single piece of technical material especially designed with a pyramidal non-slip surface. An additional injection of a specially formulated gummy material realises the ultimate gripper seat cover.

One single piece of material, thus completely watertight

The Pyramid Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water proof and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy

The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.

The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

BlackBird Racing Complete Seat

Standard height

Includes

BlackBird Racing Pyramid Gripper Seat cover

BlackBird Racing Seat Foam

Seat Base

Comes fully assembled

BlackBird Racing Complete Seat

15mm Higher then standard

Includes

BlackBird Racing Pyramid Gripper Seat cover

BlackBird Racing Seat Foam

Seat Base

Comes fully assembled

Blackbird Racing Seat Foams are made of rigid polyurethane foam, they are waterproof and fit perfectly with the original seat base and seat cover.

The polyurethane foam is produced using a chemical formula created for the aerospace industry so is of the highest quality. Thanks to the molecules with closed cells it also weighs less than the original seat foam.

Standard height seat foam.

Firmer material then original seat foams.

The Double Grip 3 is the latest evolution of the gripper seat cover from BlackBird Racing.

The DG3 Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.

This specific effect is created by a high frequency welding of three different materials.

The DG3 Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.

The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

The Pyramid Seat Cover is the original gripper seat cover by BlackBird Racing and arguably the best.

The Pyramid Seat Cover is created using one single piece of technical material especially designed with a pyramidal non-slip surface. An additional injection of a specially formulated gummy material realises the ultimate gripper seat cover.

One single piece of material, thus completely watertight

The Pyramid Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water proof and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy

The Pyramid Seat Cover is the original gripper seat cover by BlackBird Racing and arguably the best.

The Pyramid Seat Cover is created using one single piece of technical material especially designed with a pyramidal non-slip surface. An additional injection of a specially formulated gummy material realises the ultimate gripper seat cover.

One single piece of material, thus completely watertight

The Pyramid Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water proof and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

BlackBird Racing Complete Seat

Standard height

Includes

BlackBird Racing Triple Pleat Gripper Seat cover

BlackBird Racing Seat Foam

Seat Base

Comes fully assembled

BlackBird Racing Complete Seat

Standard height

Includes

BlackBird Racing Triple Pleat Gripper Seat cover

BlackBird Racing Seat Foam

Seat Base

Comes fully assembled

The Double Grip 3 is the latest evolution of the gripper seat cover from BlackBird Racing.

The DG3 Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.

This specific effect is created by a high frequency welding of three different materials.

The DG3 Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

BlackBird Racing Complete Seat

15mm higher then Standard

Includes

BlackBird Racing Pyramid Gripper Seat cover

BlackBird Racing Seat Foam

Seat Base

Comes fully assembled

Blackbird Racing Lower Forks Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

Two lower fork decals are included. One for the left fork and another for the right fork.

Pre-cut for perfect fit to the original lower fork guards

The Double Grip 3 is the latest evolution of the gripper seat cover from BlackBird Racing.

The DG3 Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.

This specific effect is created by a high frequency welding of three different materials.

The DG3 Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

The Double Grip 3 is the latest evolution of the gripper seat cover from BlackBird Racing.

The DG3 Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.

This specific effect is created by a high frequency welding of three different materials.

The DG3 Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

BlackBird Racing Fender Anti Mud Foam.

In the off road, mud sticks under the bike fenders increasing the bike weight and making the ride heavier. The ANTI-MUD FOAM kit prevents the mud sticking to the under part of both the bike fenders and facilitates the detachment for the mud during the jolts that the motorcycle has in the off-road use. Produced in collaboration with the motocross world championship teams, it has fully met the expectations of the best riders and mechanics.

Made of a special foam and laminated with a strong self-adhesive, it is easy to apply, being specifically shaped for the front and rear bike fenders.

BlackBird Racing Sticker Sheet is composed of a sheet made of back-printed crystall material (thickness 0,5 mm) containing pre-cut stickers of different sizes. Universal application on motorbikes or various surfaces.

BlackBird Racing Complete Seat

15mm higher then Standard

Includes

BlackBird Racing Pyramid Gripper Seat cover

BlackBird Racing Seat Foam

Seat Base

Comes fully assembled

Blackbird Racing Lower Forks Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

Two lower fork decals are included. One for the left fork and another for the right fork.

Pre-cut for perfect fit to the original lower fork guards

Blackbird Racing Seat Foams are made of rigid polyurethane foam, they are waterproof and fit perfectly with the original seat base and seat cover.

The polyurethane foam is produced using a chemical formula created for the aerospace industry so is of the highest quality. Thanks to the molecules with closed cells it also weighs less than the original seat foam.

15mm higher than standard seat foam.

Firmer material then original seat foams.

The Double Grip 3 is the latest evolution of the gripper seat cover from BlackBird Racing.

The DG3 Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.

This specific effect is created by a high frequency welding of three different materials.

The DG3 Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Front Fender

Rear Fender