High energetic performance for OFFROAD use only

Maximum brightness and depth of detail guaranteed, even in total dark situations

IP68 waterproof: permanent impermeability up to 3 metres deep

16 Led, 48W headlight

4320 Lumen

DC electrical supply from 9 to 32V

Estimated led lifespan: 50000 hours

Operating temperatures between between -40 and 85 degrees C

Easy and fast mounting, using the original headlights rubber bands

High energetic performance for OFFROAD use only

Perfectly interchangeable with the original headlight

Maximum brightness and depth of detail guaranteed, even in total dark situations

IP68 waterproof: permanent impermeability up to 3 metres deep

16 Led, 48W headlight

4320 Lumen

DC electrical supply from 9 to 32V

Estimated led lifespan: 50000 hours

Operating temperatures between between -40%uFFFD and 85%uFFFD C

Easy and fast mounting, using the original headlight%u2019s rubber bands

Developed for enduro KTM/HUSQVARNA bikes from 2017 to 2019

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

Plastic Kit Includes:

- Front Fender

- Front Headlight Surround

- Lower Fork Covers

- Radiator Shrouds

- Air Box Cover

- Rear Fender Side Panel

Open hand guard with direct fitment to front brake and clutch pumps

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

Open hand guard with direct fitment to front brake and clutch pumps

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

Open hand guard with direct fitment to front brake and clutch pumps

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

Open hand guard with direct fitment to front brake and clutch pumps

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps

Mounting kit included

Open handguard, applicable keeping the original position of the button panel

Last generation skid plate with built-in fin

Printed fin designed to protect the suspension link from impacts, mud and sand. It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks) Its design ensures the best cover around the link, thus guaranteeing a clean ride

Plastic 6mm thick for the best frame and engine protection

Protection areas extended over the engine covers, on the water pump and on the foot peg mounts

Discharge areas to improve lightness and airflow and to ease the cleaning process behind the skid plate

Design developed to reduce the presence of mud and debris around the engine

Possibility to combine its use with X-POWER (clutch and ignition cover protection)

Carbon look refinishing

Easy mounting on the original fastenings of the bike

Open hand guard with universal mounting kit

Adjustable horizontally in two different positions

Maximum ventilation

Dual-injection cover for maximum impact resistance

Easy mount

Lightweight, compact and flexible handguard

Flap designed to protect the brake and clutch pumps