Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.
All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.
- Constructed of Impact and Abrasion Resistant Polyurethane.
- Allows for Greater Fuel Capacity.
- Slim Profile.
- Excellent Fit.
- Gas Cap and Vent Hose Included.
- Includes Mounting Kit & Hardware if Applicable.
*This Tank ONLY Fits DRZ 400 E Models*
Blackbird Racing Swingarm Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
Two swingarm are included. One for the left side and another for the right.
Pre-cut for perfect fit to the original swingarm of the bike
The Pyramid Seat Cover is the original gripper seat cover by BlackBird Racing and arguably the best.
The Pyramid Seat Cover is created using one single piece of technical material especially designed with a pyramidal non-slip surface. An additional injection of a specially formulated gummy material realises the ultimate gripper seat cover.
One single piece of material, thus completely watertight
The Pyramid Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water proof and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy
Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.
All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.
- Constructed of Impact and Abrasion Resistant Polyurethane.
- Allows for Greater Fuel Capacity.
- Slim Profile.
- Excellent Fit.
- Gas Cap and Vent Hose Included.
- Includes Mounting Kit & Hardware if Applicable.
This skid plate has been designed and built for easy and quick installation using existing mounting holes.
A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.
Includes a pre-drilled pattern on the inside for drilling holes for venting.
Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.
The plastic skid plate does not alter the chassis rigidity.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.
Plastic Kit Includes:
- Front Fender
- Radiator Shrouds
- Side Panels / Air Box Cover
- Rear Fender - to fit short subframe model. Can be modified to fit long subframe
Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.
This kit includes decals for:
Radiator Shrouds
Tank
Front Fender
Rear Fender
Note: Some bubbles in the decal will occur when applying decals to plastic fuel tanks. Fuel vapour coming through from inside the tank will cause bubbles in any decal applied to said tank. To help minimise this bubbling effect BlackBird Racing decals come with small holes on the tank part to help prevent fuel vapour being trapped behind the decal.
Tecnosel Complete kit composed of sticker kit and matching seat cover.
The graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use. Our decals are Silk-screen printed using colour fast and brilliant inks.
The seat cover is to replace the original one and is produced with the best technologies on the market. It fits perfectly with the shapes of the seat, even with higher foams up to almost 2cm. The special grip reliefs on the central part of this cover are designed with the objective of holding the rider in place while accelerating allowing them to conserve energy for longer lasting effort on the bike.
To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.
This kit includes decals for:
Radiator Shrouds* Note: To fit 1999-2000 model you must use 1996-1998 Plastic Shrouds not included.
Tank
Front Fender
Rear Fender
Side Panels
Front Plate
Swing Arm
Lower Fork Covers
This Kit also includes matching seat cover.
Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.
All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.
- Constructed of Impact and Abrasion Resistant Polyurethane.
- Allows for Greater Fuel Capacity.
- Slim Profile.
- Excellent Fit.
- Gas Cap and Vent Hose Included.
- Includes Mounting Kit & Hardware if Applicable.
High Quality product made and assembled in Italy
Tecnosel Complete kit composed of sticker kit and matching seat cover.
The graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use. Our decals are Silk-screen printed using colour fast and brilliant inks.
The seat cover is to replace the original one and is produced with the best technologies on the market. It fits perfectly with the shapes of the seat, even with higher foams up to almost 2cm. The special grip reliefs on the central part of this cover are designed with the objective of holding the rider in place while accelerating allowing them to conserve energy for longer lasting effort on the bike.
To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.
This kit includes decals for:
Radiator Shrouds
Tank
Rear Fender
Side Panels
Front Plate
Swing Arm
This Kit also includes matching seat cover.
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Tecnosel Complete kit composed of sticker kit and matching seat cover.
The graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use. Our decals are Silk-screen printed using colour fast and brilliant inks.
The seat cover is to replace the original one and is produced with the best technologies on the market. It fits perfectly with the shapes of the seat, even with higher foams up to almost 2cm. The special grip reliefs on the central part of this cover are designed with the objective of holding the rider in place while accelerating allowing them to conserve energy for longer lasting effort on the bike.
To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.
This kit includes decals for:
Radiator Shrouds* Note: To fit 1996-1998 model you must use 1999-2000 Plastic Shrouds not included.
Tank
Front Fender
Rear Fender
Side Panels
Front Plate
Swing Arm
Lower Fork Covers
This Kit also includes matching seat cover.
This skid plate has been designed and built for easy and quick installation using existing mounting holes.
A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.
Includes a pre-drilled pattern on the inside for drilling holes for venting.
Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.
The plastic skid plate does not alter the chassis rigidity.
Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.
This kit includes decals for:
Radiator Shroud
Tank
Front Fender
Rear Fender
Note: Some bubbles in the decal will occur when applying decals to plastic fuel tanks. Fuel vapour coming through from inside the tank will cause bubbles in any decal applied to said tank. To help minimise this bubbling effect BlackBird Racing decals come with small holes on the tank part to help prevent fuel vapour being trapped behind the decal.
The Acerbis Chain Slider is the simple recipe your bike needs to keep the chain in its place and your swing arm in one piece.
Acerbis applies the same excellent quality of their plastics to their chain sliders as well. Made of ultra-durable polyurethane, this chain slider preserves your chain and swing arm with its smooth-as-butter surface that practically eliminates unwanted friction. The tough construction means youll get plenty of hours filled with clatter-free riding and wont have to worry about replacing your Acerbis slider anytime soon. Installation is a breeze. Since this slider is super flexible, you can simply spread it and slip it onto your swing arm before bolting it in place. It even comes with a sticker.
The Acerbis Chain Slider does its job wonderfully. So keep your chain in check and your mind on other things with the Acerbis Chain Slider.
- Polyurethane Construction
- Meets or exceeds OEM Specifications.
- Quality Replacement for Stock Swing Arm-Mounted Chain Slider.
- Secures with Stock Fasteners
BlackBird Racing Sticker Sheet is composed of a sheet made of back-printed crystall material (thickness 0,5 mm) containing pre-cut stickers of different sizes. Universal application on motorbikes or various surfaces.
Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.
This kit includes decals for:
Radiator Shrouds
Front Fender
Rear Fender
The Pyramid Seat Cover is the original gripper seat cover by BlackBird Racing and arguably the best.
The Pyramid Seat Cover is created using one single piece of technical material especially designed with a pyramidal non-slip surface. An additional injection of a specially formulated gummy material realises the ultimate gripper seat cover.
One single piece of material, thus completely watertight
The Pyramid Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water proof and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.
Plastic Kit Includes:
- Front Fender
- Radiator Shrouds
- Side Panels / Air Box Cover
- Rear Fender - to fit short subframe model. Can be modified to fit long subframe
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM
Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.
All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.
- Constructed of Impact and Abrasion Resistant Polyurethane.
- Allows for Greater Fuel Capacity.
- Slim Profile.
- Excellent Fit.
- Gas Cap and Vent Hose Included.
- Includes Mounting Kit & Hardware if Applicable.
Hub Colour: Red
Rim Colour: Black
Spoke Colour: Silver
Nipple Colour: Red
Front Wheel Size: 1.60 x 21
Rear Wheel Size: 2.15 x 18
Kite Sports Wheel Sets
Sport wheels are the choice of those who want a product that is solid, reliable and with the best price-quality ratio. EXCEL One rims have characteristics similar to those of a OEM rim and they are the choice of those who want a product that is solid, reliable and with the best price-quality ratio.
Kite Sports wheels have high-quality components, such as ISB bearings, Alpina spokes and nipples and Excel One rims. The Sport hub is manufactured with the same aircraft aluminium 6082 used for the Elite hubs and is processed through simplified CNC machining.
Kite Sports Wheel Features:
- Hub is made from complete billet 6082 T6 aircraft grade aluminium.
- ISB Bearings
- Italian made Alpina galvanic treatment zinc plated carbon steel spokes. High resistance and minimum weight.
- Italian made Alpina aluminium nipples.
- Excel One Rims.
- All Kite wheel sets are fitted with a complete set of bearings, seals and internal spacers and built with a 36 holes rear hub.
- Weight: Front 3.22kg, Rear 4.08kg (Based on 2.15x19")
- Made and assembled in Italy
- Wheel sets do not include wheel spacers, sprocket bolts or disc bolts
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM
The Acerbis Chain Slider is the simple recipe your bike needs to keep the chain in its place and your swing arm in one piece.
Acerbis applies the same excellent quality of their plastics to their chain sliders as well. Made of ultra-durable polyurethane, this chain slider preserves your chain and swing arm with its smooth-as-butter surface that practically eliminates unwanted friction. The tough construction means youll get plenty of hours filled with clatter-free riding and wont have to worry about replacing your Acerbis slider anytime soon. Installation is a breeze. Since this slider is super flexible, you can simply spread it and slip it onto your swing arm before bolting it in place. It even comes with a sticker.
The Acerbis Chain Slider does its job wonderfully. So keep your chain in check and your mind on other things with the Acerbis Chain Slider.
- Polyurethane Construction
- Meets or exceeds OEM Specifications.
- Quality Replacement for Stock Swing Arm-Mounted Chain Slider.
- Secures with Stock Fasteners
The Double Grip 3 is the latest evolution of the gripper seat cover from BlackBird Racing.
The DG3 Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.
This specific effect is created by a high frequency welding of three different materials.
The DG3 Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.
Auto Ventilate Disc
Easy cleaning of the mud
Increased heat exchange surface
Constancy of performance even after long use