With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM
Acerbis Mini Number Plates are excellent promotional items and can be customised with stickers or custom graphics that you provide.
They measure 4.5 x 4.5 Inches and have two small feet on the back of the base that allow the Number Plate to be free-standing on a table or shelf.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.
Plastic Kit Includes:
- Front Fender
- Front Number Plate
- Lower Fork Covers
- Radiator Shrouds
- Air Box Cover
- Side Panels
- Rear Fender
High energetic performance for OFFROAD use only
Perfectly interchangeable with the original headlight
Maximum brightness and depth of detail guaranteed, even in total dark situations
IP68 waterproof: permanent impermeability up to 3 metres deep
16 Led, 48W headlight
4320 Lumen
DC electrical supply from 9 to 32V
Estimated led lifespan: 50000 hours
Operating temperatures between between -40 and 85 degrees C
Easy and fast mounting, using the original headlights rubber bands
Developed for enduro KTM/HUSQVARNA
This skid plate has been designed and built for easy and quick installation using existing mounting holes.
A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.
Includes a pre-drilled pattern on the inside for drilling holes for venting.
Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.
The plastic skid plate does not alter the chassis rigidity.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM
Open hand guard with universal mounting kit
Adjustable horizontally in two different positions
Maximum ventilation
Dual-injection cover for maximum impact resistance
Easy mount
Lightweight, compact and flexible handguard
Flap designed to protect the brake and clutch pumps
Acerbis is constantly trying to improve its product, and the Vented Uniko Hand Guard is a testament to this fact. After feedback from their professional riders, Acerbis realised there was demand for a vented version of the popular Uniko Hand Guard. In response to that demand, Acerbis brought the Vented Uniko to market. This hand guard features a large venting pattern strategically positioned to direct air flow past the levers. In addition, the improved universal mounting system allows the guards to be positioned independent of the angle of the levers.
- The Vented Uniko features a large vent to direct airflow past the levers.
- Lightweight Polypropylene construction for maximum performance and durability.
- The included universal mount kit allows the guards to be positioned independent of the angle of the levers.
- Universal mounting brackets suitable for all MX bikes.
Open hand guard with universal mounting kit
Adjustable horizontally in two different positions
Maximum ventilation
Dual-injection cover for maximum impact resistance
Easy mount
Lightweight, compact and flexible handguard
Flap designed to protect the brake and clutch pumps
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.
Plastic Kit Includes:
- Front Fender
- Lower Fork Covers
- Radiator Shrouds
- Air Box Cover
- Side Panels / Air Box
- Rear Fender
- Headlight Surround
Open hand guard with universal mounting kit
Adjustable horizontally in two different positions
Maximum ventilation
Dual-injection cover for maximum impact resistance
Easy mount
Lightweight, compact and flexible handguard
Flap designed to protect the brake and clutch pumps
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM
Open hand guard with direct fitment to Brembo / Magura front brake and clutch pumps
Also applicable for fitment to enduro models with control switches.
Adjustable horizontally in two different positions
Maximum ventilation
Dual-injection cover for maximum impact resistance
Easy mount
Lightweight, compact and flexible handguard
Flap designed to protect the brake and clutch pumps
Mounting kit included
Open handguard, applicable keeping the original position of the button panel
Replacement dual injected polypropylene shields for the X-Factor Handguards.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.
Plastic Kit Includes:
- Front Fender
- Front Number Plate
- Lower Fork Covers
- Radiator Shrouds
- Air Box Cover
- Side Panels
- Rear Fender
Open hand guard with direct fitment to Brembo / Magura front brake and clutch pumps
Also applicable for fitment to enduro models with control switches.
Adjustable horizontally in two different positions
Maximum ventilation
Dual-injection cover for maximum impact resistance
Easy mount
Lightweight, compact and flexible handguard
Flap designed to protect the brake and clutch pumps
Mounting kit included
Open handguard, applicable keeping the original position of the button panel.
The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.
The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.
Features
- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.
- It is made from a dual-injected mould.
- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.
- Periodic cleaning behind the frame guard is recommended.
Sold as a Pair. All mounting hardware included.
Open hand guard with direct fitment to Brembo / Magura front brake and clutch pumps
Also applicable for fitment to enduro models with control switches.
Adjustable horizontally in two different positions
Maximum ventilation
Dual-injection cover for maximum impact resistance
Easy mount
Lightweight, compact and flexible handguard
Flap designed to protect the brake and clutch pumps
Mounting kit included
Open handguard, applicable keeping the original position of the button panel
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.
Plastic Kit Includes:
- Front Fender
- Front Number Plate
- Lower Fork Covers
- Radiator Shrouds
- Air Box Cover
- Side Panels
- Rear Fender
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM
Open hand guard with direct fitment to Brembo / Magura front brake and clutch pumps
Also applicable for fitment to enduro models with control switches.
Adjustable horizontally in two different positions
Maximum ventilation
Dual-injection cover for maximum impact resistance
Easy mount
Lightweight, compact and flexible handguard
Flap designed to protect the brake and clutch pumps
Mounting kit included
Open handguard, applicable keeping the original position of the button panel.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
- Italian made and moulded.
- Plastics are constructed from Durable Gloss Polypropylene
- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.
- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.
Plastic Kit Includes:
- Front Fender
- Front Number Plate
- Lower Fork Covers
- Radiator Shrouds
- Air Box Cover
- Side Panels / Air Bo
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm