With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

High energetic performance for OFFROAD use only

Maximum brightness and depth of detail guaranteed, even in total dark situations

IP68 waterproof: permanent impermeability up to 3 metres deep

16 Led, 48W headlight

4320 Lumen

DC electrical supply from 9 to 32V

Estimated led lifespan: 50000 hours

Operating temperatures between between -40 and 85 degrees C

Easy and fast mounting, using the original headlights rubber bands

Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.

- Moulded openings to access the Filter Cover and Oil Cap

- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts

- Resistant to High Temperatures

- Slim Profile designed not to interfere with Boots and Riding Position

- Compatible with ACERBIS Skid plates

Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing

Left side: Provides protection to the Ignition Cover and Clutch Actuator

High energetic performance for OFFROAD use only

Perfectly interchangeable with the original headlight

Maximum brightness and depth of detail guaranteed, even in total dark situations

IP68 waterproof: permanent impermeability up to 3 metres deep

16 Led, 48W headlight

4320 Lumen

DC electrical supply from 9 to 32V

Estimated led lifespan: 50000 hours

Operating temperatures between between -40 and 85 degrees C

Easy and fast mounting, using the original headlights rubber bands

Developed for enduro KTM/HUSQVARNA

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

Plastic Kit Includes:

- Front Fender

- Lower Fork Covers

- Radiator Shrouds

- Air Box Cover

- Side Panels / Air Box

- Rear Fender

- Headlight Surround

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

With over 40 years experience in manufacturing replica plastics, Acerbis is the premier company for aftermarket plastic within the motorcycle industry.

All Acerbis replica plastic has the original factory shape and colour based on manufacturer specs.

Italian made and moulded.

Full Plastic Kits includes

Front fender

Rear fender

Air box side panels

Radiator shrouds

Lower fork covers

Air box covers.

Headlight Surround

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

Acerbis Chain Guides are the gold standard in drive components and purpose built to give you great wear characteristics and quiet operation.

Designed to fit inside your OEM guide housing, Acerbis creates their Guides from Proprietary Injection Moulded Polyurethane to keep your Chain gliding like its on ice.

- Replacement Chain Guide Rub Block.

- Uses all OEM Mounts and Hardware.

- Fits inside your Stock Chain Guide Housing.

- Injection Moulded Polyurethane.

- Quiet Operation and Extended Chain Life.

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

With over 40 years experience in manufacturing replica plastics, Acerbis is the premier company for aftermarket plastic within the motorcycle industry.

All Acerbis replica plastic has the original factory shape and colour based on manufacturer specs.

Italian made and moulded.

The Acerbis Chain Slider is the simple recipe your bike needs to keep the chain in its place and your swing arm in one piece.

Acerbis applies the same excellent quality of their plastics to their chain sliders as well. Made of ultra-durable polyurethane, this chain slider preserves your chain and swing arm with its smooth-as-butter surface that practically eliminates unwanted friction. The tough construction means youll get plenty of hours filled with clatter-free riding and wont have to worry about replacing your Acerbis slider anytime soon. Installation is a breeze. Since this slider is super flexible, you can simply spread it and slip it onto your swing arm before bolting it in place. It even comes with a sticker.

The Acerbis Chain Slider does its job wonderfully. So keep your chain in check and your mind on other things with the Acerbis Chain Slider.

- Polyurethane Construction

- Meets or exceeds OEM Specifications.

- Quality Replacement for Stock Swing Arm-Mounted Chain Slider.

- Secures with Stock Fasteners

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

Plastic Kit Includes:

- Front Fender

- Headlight Surround

- Lower Fork Covers

- Radiator Shrouds

- Air Box Cover

- Side Panels

- Rear Fender

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

The Acerbis Chain Slider is the simple recipe your bike needs to keep the chain in its place and your swing arm in one piece.

Acerbis applies the same excellent quality of their plastics to their chain sliders as well. Made of ultra-durable polyurethane, this chain slider preserves your chain and swing arm with its smooth-as-butter surface that practically eliminates unwanted friction. The tough construction means youll get plenty of hours filled with clatter-free riding and wont have to worry about replacing your Acerbis slider anytime soon. Installation is a breeze. Since this slider is super flexible, you can simply spread it and slip it onto your swing arm before bolting it in place. It even comes with a sticker.

The Acerbis Chain Slider does its job wonderfully. So keep your chain in check and your mind on other things with the Acerbis Chain Slider.

- Polyurethane Construction

- Meets or exceeds OEM Specifications.

- Quality Replacement for Stock Swing Arm-Mounted Chain Slider.

- Secures with Stock Fasteners

The Acerbis Chain Slider is the simple recipe your bike needs to keep the chain in its place and your swing arm in one piece.

Acerbis applies the same excellent quality of their plastics to their chain sliders as well. Made of ultra-durable polyurethane, this chain slider preserves your chain and swing arm with its smooth-as-butter surface that practically eliminates unwanted friction. The tough construction means youll get plenty of hours filled with clatter-free riding and wont have to worry about replacing your Acerbis slider anytime soon. Installation is a breeze. Since this slider is super flexible, you can simply spread it and slip it onto your swing arm before bolting it in place. It even comes with a sticker.

The Acerbis Chain Slider does its job wonderfully. So keep your chain in check and your mind on other things with the Acerbis Chain Slider.

- Polyurethane Construction

- Meets or exceeds OEM Specifications.

- Quality Replacement for Stock Swing Arm-Mounted Chain Slider.

- Secures with Stock Fasteners

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

Plastic Kit Includes:

- Front Fender

- Headlight Surround

- Lower Fork Covers

- Radiator Shrouds

- Air Box Cover

- Side Panels

- Rear Fender

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

Plastic Kit Includes:

- Front Fender

- Headlight Surround

- Lower Fork Covers

- Radiator Shrouds

- Air Box Cover

- Side Panels

- Rear Fender

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

Plastic Kit Includes:

- Front Fender

- Headlight Surround

- Lower Fork Covers

- Radiator Shrouds

- Air Box Cover

- Side Panels

- Rear Fender

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

Plastic Kit Includes:

- Front Fender

- Headlight Surround

- Lower Fork Covers

- Radiator Shrouds

- Air Box Cover

- Side Panels

- Rear Fender