Blackbird Racing Seat Foams are made of rigid polyurethane foam, they are waterproof and fit perfectly with the original seat base and seat cover.

The polyurethane foam is produced using a chemical formula created for the aerospace industry so is of the highest quality. Thanks to the molecules with closed cells it also weighs less than the original seat foam.

Standard height seat foam.

Firmer material then original seat foams.

The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.

The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Front Fender

Rear Fender

Lower Fork Covers

Blackbird Racing Lower Forks Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

Two lower fork decals are included. One for the left fork and another for the right fork.

Pre-cut for perfect fit to the original lower fork guards

Blackbird Racing Swingarm Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

Two swingarm are included. One for the left side and another for the right.

Pre-cut for perfect fit to the original swingarm of the bike

The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.

The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.

The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

Plastic Kit Includes:

- Front Fender

- Lower Fork Covers

- Radiator Shrouds

- Side Pane

- Headlight Surround

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

Hub Colour: Black

Rim Colour: Black

Spoke Colour: Black

Nipple Colour: Silver

Front Wheel Size: 1.60 x 21

Rear Wheel Size: 2.15 x 18

Kite Sports Wheel Sets

Sport wheels are the choice of those who want a product that is solid, reliable and with the best price-quality ratio. EXCEL One rims have characteristics similar to those of a OEM rim and they are the choice of those who want a product that is solid, reliable and with the best price-quality ratio.

Kite Sports wheels have high-quality components, such as ISB bearings, Alpina spokes and nipples and Excel One rims. The Sport hub is manufactured with the same aircraft aluminium 6082 used for the Elite hubs and is processed through simplified CNC machining.

Kite Sports Wheel Features:

- Hub is made from complete billet 6082 T6 aircraft grade aluminium.

- ISB Bearings

- Italian made Alpina galvanic treatment zinc plated carbon steel spokes. High resistance and minimum weight.  

- Italian made Alpina aluminium nipples.

- Excel One Rims.

- All Kite wheel sets are fitted with a complete set of bearings, seals and internal spacers and built with a 36 holes rear hub.

- Weight: Front 3.22kg, Rear 4.08kg (Based on 2.15x19")

- Made and assembled in Italy

- Wheel sets do not include wheel spacers, sprocket bolts or disc bolts

Extended cover for maximum protection of the disc and the brake calliper to protect them from mud, stones and debris

Designed for the best resistance to impacts

Air intakes designed to ensure airflow to the braking system

Easy and intuitive assembly

Maximum diameter of the disc: 280 mm

Light and resistant

Constructed of durable polypropylene and features a carbon fibre like texture.

Acerbis disc cover mount is included in this kit .

For use with stock hubs or stock style aftermarket hubs. Will not fit Talon hubs.

Acerbis disc cover mount for X-Brake, X-Brake 2.0, X-Brake Carbon and X-Brake Carbon 2.0.

Black Anodised finish.

For use with stock hubs or stock style aftermarket hubs. Will not fit Talon hubs.

Extended cover for maximum protection of the disc and the brake calliper to protect them from mud, stones and debris

Designed for the best resistance to impacts

Air intakes designed to ensure airflow to the braking system

Easy and intuitive assembly

Maximum diameter of the disc: 280 mm

Light and resistant

Constructed of durable polypropylene and features a carbon fibre like texture.

Acerbis disc cover mount is included in this kit .

For use with stock hubs or stock style aftermarket hubs. Will not fit Talon hubs.