The Acerbis 2.0 Chain Guide Block easily replaces the entire O.E.M. unit and ensures durability and high resistance to shock and wear from the chain. Made of PA6, it is made of two parts that allow installation without removing the chain.
- 100% PA6 Construction.
- Highly resistant to shock and chain wear.
- Made of two pieces, allowing it to be mounted without removing the chain.
- In the event of collision or contact with roost, PA6 Material wont bend.
- Weight: 200 grams.
- Replaceable Inserts also Available. Part Sold Separately.
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
Full Complete Plastic Kit to suit KTM SX/SXF 2023-2024
Renew your Ride with iPlastix. Quality construction, ensuring
unrivalled fitment to your motorcycle. Made and Moulded in Italy with high
grade technopolymers.
Features:
Kit Includes: Front Fender, Front Plate, Fork Covers, Radiator
Shrouds, Side Panels, Air Box Panel, Rear Fender.
·
Re-Styled Front Fender to reduce weight and mud build up.
·
Radiator Shrouds feature an all over smooth
finish allowing for easy application of Graphics & Decals.
·
Highly Resistant Plastic, Quality Constructed.
·
Prevents Cracking, Fading and Chalking.
·
Made In Italy
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: Direct mount for specific motorcycle as listed
Are you in need of long hoses for your Trail Tech Portable Off-Road Air Compressor? Look no further! Our long hoses will be the perfect addition to your off-roading kit. Here are some reasons why:
Investing in a pair of long hoses for your Trail Tech Portable Off-Road Air Compressor is a smart move for any off-road enthusiast. Don't let a lack of reach hold you back from exploring the trails. Order your long hoses today and experience the convenience and versatility they offer!
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.
All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.
- Constructed of Impact and Abrasion Resistant Polyurethane.
- Allows for Greater Fuel Capacity.
- Slim Profile.
- Excellent Fit.
- Gas Cap and Vent Hose Included.
- Includes Mounting Kit & Hardware if Applicable.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Kite Parts Flex Levers
Lever shape designed for maximum ergonomic comfort
Aircraft grade aluminium
Made from billet using CNC machining
Strong and durable flex mechanism
Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.
All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.
- Constructed of Impact and Abrasion Resistant Polyurethane.
- Allows for Greater Fuel Capacity.
- Slim Profile.
- Excellent Fit.
- Gas Cap and Vent Hose Included.
- Includes Mounting Kit & Hardware if Applicable.
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: Direct mount for specific motorcycle as listed
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: Direct mount for specific motorcycle as listed
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: Direct mount for specific motorcycle as listed
Introducing the D-Lock grips with Lock On fixing system for fast and easy installation.
With2 different interchangeable pulleys to fix them on 2 stroke bike models: KTM, Husqvarna, GASGAS, Beta
HIGH GRIP technology: The knurling - Domino patented - maximizes the grip in any direction and the adherence between grips and gloves. An index-thumb pad and the 3 clings waffle on the back for increased grip.
Flange diameter: 61,5 mm
Grip end: Closed
Grips Lenght: 116 mm
Handle Diameter: 30 mm
Handlebar Diameter: 22 mm
Length: left 125 mm / right 130 mm
Material: Thermoplastic rubber
The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.
The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.
The Trail Tech UNIVERSAL TEMP METER senses temperature on motorcycles, UTVs, ATVs, SNOW Machines, and other applications where a minimal footprint, watertight integrity, and durability are desired.
The included radiator fin and cylinder head sensor assortment allow for the best option based on your application. After removing a sensor from the included array, they can be installed by pressing a radiator fin sensor between the fins of a radiator or replacing a spark plug crush washer with a cylinder head sensor. You can even capture ambient air temp by leaving the sensor wire exposed to the open air. This UNIVERSAL TEMP METER is primarily designed for motor vehicles use, but it is also well suited for DIY applications such as greenhouses, refrigerators, and computers.
If you need TEMP monitoring, then you need this UNIVERSAL TEMP METER!
DISPLAY: Displays ºF/ºC temperature for whatever the copper sensor is attached to. Monitor the max temperature reached and press the front button to see the time-of-day clock.
INCLUDED SENSOR CARD: Choice of 6 sensor heads included in the kit. Remove chosen head from the card, then fasten it to the sensor wire with a screw. It is possible to work with homemade DIY copper heads for various uses.
For best performance, use the provided copper sensors.
SENSOR CHOICES: Vehicle coolant sensor heads press into radiator fins (7, 8, and 10mm), or choose an engine ring sensor that replaces a head bolt or spark plug crush washer (10, 12, and 14mm).
BEST USE: Great for monitoring the temperature of UTVs, street, adventure, and off-road motorcycles.
Works great on other vehicles like farm equipment. Use this meter wherever you need to monitor the temperature on your application.
INSTALL: Comes with VHB tape for a quick head unit install or mechanically fastens with M4 (#6) bolts (not included).
BATTERY: The internal battery is NOT replaceable! Ultra-low power design of the product ensures a lifetime of 5+ years. Complete epoxy encapsulation provides the best weather and anti-vibration resistance for the harshest applications.
Renew your Ride with iPlastix. Quality construction, ensuring unrivalled fitment to your motorcycle. Made and Moulded in Italy with high grade technopolymers.
Features:
· Highly Resistant Plastic, Quality Constructed.
· Prevents Cracking, Fading and Chalking.
· Made In Italy
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: Direct mount for specific motorcycle as listed
The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.
Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.
With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.
All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.
Full Complete Plastic Kit to suit KTM EXC/EXCF 2024
Renew your Ride with iPlastix. Quality construction, ensuring
unrivalled fitment to your motorcycle. Made and Moulded in Italy with high
grade technopolymers.
Features:
Kit Includes: Front Fender, Headlight Surround, Fork Covers, Radiator
Shrouds, Side Panels, Air Box Panel, Rear Fender.
·
Re-Styled Front Fender to reduce weight and mud build up.
·
Radiator Shrouds feature an all over smooth
finish allowing for easy application of Graphics & Decals.
·
Highly Resistant Plastic, Quality Constructed.
·
Prevents Cracking, Fading and Chalking.
·
Made In Italy
Full Complete Plastic Kit to suit KTM EXC/EXCF 2024
Renew your Ride with iPlastix. Quality construction, ensuring unrivalled fitment to your motorcycle. Made and Moulded in Italy with high grade technopolymers.
Features:
Kit Includes: Front Fender, Headlight Surround, Fork Covers, Radiator Shrouds, Side Panels, Air Box Panel, Rear Fender.
· Re-Styled Front Fender to reduce weight and mud build up.
· Radiator Shrouds feature an all over smooth finish allowing for easy application of Graphics & Decals.
· Highly Resistant Plastic, Quality Constructed.
· Prevents Cracking, Fading and Chalking.
· Made In Italy
The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.
- Closed Hand Guard
- Steel Bar
- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar
- Steel expander for tighter fastening and to oppose torsion in case of impact
- Dual Injected Covers
- Application: Direct mount for specific motorcycle as listed