Muc-Off Waterless Wash is a highly advanced, easy to use spray which cleans and polishes in seconds without the need for water. It details your whole bike, motorcycle or car in seconds leaving behind a streak free shine. Its innovative formula is designed to encapsulate any surface dirt to prevent scratching.
Use it to remove light contaminants in between major washes.
Features:
- Cleans and polishes in one application
- No need for water!
- Long lasts lustre
- No residual dust or streaks
- Non-sticky
- Powder free
- Suitable to use on bicycles, motorcycles, cars & R.Vs
Kite Parts Silicon Hoses
High quality silicone
Less yeld loss on the cooling system
Better resistance to high temperatures
High resistance to aging
Working temperature range -40 to 180 degrees
Max pressure 4 bar
Note: Some kits may require the elimination of the thermostat for correct instalation
Kite Parts Silicon Hoses
High quality silicone
Less yeld loss on the cooling system
Better resistance to high temperatures
High resistance to aging
Working temperature range -40 to 180 degrees
Max pressure 4 bar
Note: Some kits may require the elimination of the thermostat for correct instalation
Auto Ventilate Disc
Easy cleaning of the mud
Increased heat exchange surface
Constancy of performance even after long use
The Trophy 19 seat cover is produced with the best technologies on the market.
The Trophy Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.
This specific effect is created by a high frequency welding of three different materials.
The Trophy Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.
Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.
This kit includes decals for:
Radiator Shrouds
Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.
This kit includes decals for:
Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.
This kit includes decals for:
Blackbird Racing Swingarm Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
Two swingarm are included. One for the left side and another for the right.
Pre-cut for perfect fit to the original swingarm of the bike
Blackbird Racing Swingarm Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
Two swingarm are included. One for the left side and another for the right.
Pre-cut for perfect fit to the original swingarm of the bike
The Acerbis X-Seat debut set a new benchmark in the industry for its revolutionary design and technical features. Made entirely of one piece, the X-Seat has recently been updated and is now widely used by Motocross and Enduro riders who seek its lightness, exceptional durability, comfort and optimal grip.
- Fully external plastic shell with anti-slip grip.
- External plastic shell bonded with waterproof inner foam.
- Shell-bonded, expanded waterproof foam for maximum comfort.
- At 1,450 grams, lighter than leading competitors.
- Fully waterproof; the integrity of seat does not deteriorate after pressure washing.
- Rear seat clamps are Steel, while front brackets are Plastic. (Where Applicable)
- Air version features perforation for better cooling airflow.
Notes: Washable with pressure washer and soap and water only - do NOT use chemicals or solvents.
*Note: This Seat will have the same firmness or be firmer than a Standard Seat Foam.
The X-ROAD brake lever guard is a small protector ideal for protecting the brake lever on a street bike from accidentally being engaged by another rider or in the event of a crash.
%u2022 Adjustable length to fit all types of levers
%u2022 Pre-curved design to guarantee maximum freedom of movement
%u2022 Use of high-strength Nylon to ensure stiffness and flexibility in case of contact
%u2022 Aerodynamic shield for protection of the lever
%u2022 Expander mounting kit included for handlebars with an inside diameter ranging from 13.6mm - 29 mm
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.
The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.
Features
- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.
- It is made from a dual-injected mould.
- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.
- Periodic cleaning behind the frame guard is recommended.
Sold as a Pair. All mounting hardware included.
The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.
The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.
Features
- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.
- It is made from a dual-injected mould.
- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.
- Periodic cleaning behind the frame guard is recommended.
Sold as a Pair. All mounting hardware included.
The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.
The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.
Features
- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.
- It is made from a dual-injected mould.
- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.
- Periodic cleaning behind the frame guard is recommended.
Sold as a Pair. All mounting hardware included.
*Mount sold separately and is required to fit this product to your motorcycle. Please see related products for mount kit options. .
The X-Brake Mini is a vented disc guard for mini bikes. The X-Brake Mini provides unparalleled protection, strength, and design. It features a Dual mould injected design to keep sticks, rocks, and other debris from damaging or becoming tangled in the front rotor. It also features ample venting to keep the brake cool in all conditions. The cover also provides protection to the brake caliper. Constructed of durable polypropylene and features a carbon fibre like texture.
*Mount sold separately and is required to fit this product to your motorcycle. Please see related products for mount kit options.
The all new Carbon Fibre X-Brake Vented disc cover was designed with more ventilation to help fight front brake fade. The durable Carbon fibre construction offers unparalleled protection for your front brake rotor and caliper.
With so many different airbox designs out there, the Uniko Washing Cover is a perfect fit, as it fits all of them! The pliable rubber Uniko Washing Cover stretches over any filter cage after the air filter is removed, allowing it to work on any bike including KTMs new two prong air filter cage.
The wash cover is critical to protecting the engine from water when washing the bike.