The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included: Direct mount for specific motorcycle as listed
  
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Acerbis Endurance-X is a modern redesign of our famous X-Factor handguard. The Ultimate handguard for people looking for the ultimate protection, ideal for extreme-hard enduro and Adventure bike riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

• Closed handguard with aluminum bar and bracelets
• Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. 
• Cover:
  1) Impact resistant
  2) Wide area to protect the pilot's hands more
  3) Flexible lower area to absorb accidental contact with the knee.
• Brake/clutch levers and pump assemblies
• Mounting kit included:
  Mounts to all off road bikes (Adventure, motocross and enduro) with HANDLEBARS SIZE:
  - Inner size from 13.5mm TO 16mm
  - Outer size from 22mm TO 28mm.
• Co-molded logo
• Polypropylene 16.00%
• Aluminum 70.00%
• Steel 14.00%
• Made In Italy

The Original Acerbis Rally Brush Guard.

- Closed Hand Guard

- Solid Nylon Composite

- Application: on handle Bars with inner diameter 14mm and outside diameter from 22mm to 28mm

The Original Acerbis Rally Brush Guard.

- Closed Hand Guard

- Solid Nylon Composite

- Application: on handle Bars with inner diameter 14mm and outside diameter from 22mm to 28mm

The Acerbis X-Factor is the new ultra-resistant handguard made for people looking for more protection, ideal for extreme-hard enduro and Adventure riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

The broader bi-injection cover protects almost all of the riders hands with pre-shaped slits allowing increased ventilation.

The Acerbis X-Factor is the new ultra-resistant handguard made for people looking for more protection, ideal for extreme-hard enduro and Adventure riders.

Featured with an ANTICORODAL bar with 35 mm C section, that ensures a resistance 5 times higher than a classic aluminum handguard. The bracelet has an increased thickness from 15 mm to 19 mm. Not only does this increase rigidity, but also increases torsional strength.

The broader bi-injection cover protects almost all of the riders hands with pre-shaped slits allowing increased ventilation.

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: on handle Bars with inner diameter from 13.5mm to 16mm and outside diameter from 22mm to 28mm

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed

The Acerbis X-Factory Hand Guards feature a Steel Bar wrapped with an injection Moulded Nylon Composite. A replaceable Dual Injected Polypropylene shield, mounts to the bar offering un-surmounted protection from roost, debris, and extreme conditions.

- Closed Hand Guard

- Steel Bar

- Anti-corodal Armbands to fasten the Hand Guard to the Handlebar

- Steel expander for tighter fastening and to oppose torsion in case of impact

- Dual Injected Covers

- Application: Direct mount for specific motorcycle as listed