Trail Techs TTO Temperature Switching Fan Kit monitors your KTM & Husqvarnas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.
- Custom adjustment of temperature trigger point
- No cutting of fluid lines with included fin sensor
- 30 watt draw
- 4 Inch fan
- 12V DC ONLY
- Temperature: (-)40 to 300 Degrees Celsius
- Physical Weight: 652 Grams
- Physical Dimensions: 109 x 109 x 48mm
NOTE: Please make sure bike has necessary power available.
On bikes that have a regulated thermostatically controlled harness (this includes all new KTM and Husqvarna EFI 2 strokes) you will need to install the included wire harness back to the battery and attached the fan kit to that wire harness.
Contents
A Inch SPAL Fan: 7051-FN1
TTV Temperature Gauge: 732-S00
Radiator Bracket: 7051-BR11
Temperature Sensor: 7500-3007
Wire Harness: 732-WH1
The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.
Battery Life 5 Years
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Kickstand Length: 394mm
Weight: 907g
Bracket Material: Ultra-High Strength Chromoly Steel
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
Fitment: Custom Fit Per Motorcycle
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Kickstand Length: 394mm
Weight: 907g
Bracket Material: Ultra-High Strength Chromoly Steel
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
Fitment: Custom Fit Per Motorcycle
High-impact black foot for use with square Trail Tech kickstand leg
Note:
Part number 5925-foot (Black) only fits the square Trail Tech kickstands
1. With the kickstand arm mounted to the motorcycle hold the replacement foot near the insertion hole and note rotation to allow the foot to lay flat on the ground once installed.
2. Remove the kickstand arm from bike
3. Remove old foot. This is usually accomplished by putting the foot in a vise and inserting a long screw driver or arm in the pivot bolt mounting hole and twisting it loose while pulling. To ease removal of the foot heat can be applied to the leg with a heat gun.
4. Clean and remove all oils and residue form the new foot and the kickstand foot hole
5. Use threadlocker (Surlok 1270) on the entire ribbed area that fits into the kickstand cavity to glue the foot in place
6. To insert the foot we recommend using a press. Other methods can be used. Make sure the rotation is correct and push the foot into place until it is fully bottomed against the lower flange. IMPORTANT: ALWAYS USE EYE PROTECTION WHEN USING A PRESS OR HAMMER OPERATION.
7. Wipe clean all remaining loctite
8. Remount arm to bike and insure the rotation of the foot is correct. If not use a soft jaw vice to hold the foot and twist it to the correct rotation.
9. Allow 24 hours before use of the kickstand.
Temperature Sensor: 25mm Inline Water Temp Sensor.
Type
Engine Temperature Water Cooled Machines
Inline
Physical Features
Wire Length 900mm
(35%u201D)
Diameter 25mm (0.98")
Trail Tech kickstands are custom designed for both Enduro and MX style motorcycles. Strong, Lightweight and Attractive. Trail Tech kickstands are slightly longer than most stock kickstand and have a wide based foot for trail riding.
Kickstand Length: 394mm
Weight: 907g
Bracket Material: Ultra-High Strength Chromoly Steel
Foot: Aluminium Re-enforced High Impact Nylon Foot at Base of Stand
Fitment: Custom Fit Per Motorcycle
Head Unit Only (No Sensors).
Temperature Sensor: 19mm Inline Water Temp Sensor.
Type
Engine Temperature Water Cooled Machines
Inline
Physical Features
Wire Length 550mm
(21%u201D)
Diameter 19mm (0.75")
Voyager/Vapor handlebar mounting hardware. Included in every Voyager kit. Fits 1-1/8'' - 7/8'' handlebars.
Positions Voyager/Vapor in the center of the controls, in the safe zone below the bars.
Type
Handlebar Mounting Hardware For Voyager GPS
Physical Features
Handlebar Diameters 7/8''
1-1/8''
The Connected Riders GPS
The next evolution of Trail Techs most popular off-road GPS.
Featuring patent pending Buddy Tracking*, Bluetooth for phone and media connection, 4 Inch colour touchscreen, and full vehicle integration. See the data that matters most to you.
TRACKS AND WAYPOINTS
Record Tracks
GPX File Import and Export
Drop Customised Waypoints
Set Waypoints as Destination
Personalise Map Layer Colours
Plan & Record Entire Trail Systems
BUDDY TRACKING
Ride group visible on map
Up to 20 Buddies per Ride Group
Long range (depending on terrain)
Emergency Beacon Flashes Red on Friends Screens
Personalise Your Buddy Icon Colour and Name
Upgrade Buddy Antenna for Longer Range
Cellular service not required
MINI-MENU
Tracks
Waypoints
Map Layers
Map Options
Buddy Tracking Setup
1. What maps come standard with Voyager Pro?
Voyager Pro is pre-loaded with maps of the USA.
2. How do I upload different country and region maps to Voyager Pro?
Download maps from our website for free: https://www.trailtech.net/software/
3. What types of Tracks/Routes/Waypoints can I upload to my Voyager Pro?
Voyager Pro accepts tracks, routes, and waypoints in GPX format.
4. Can I use Voyager Pro without vehicle sensors?
Yes, you can use Voyager Pro without any sensors connected, but a 12v DC power connection is required. However, integrating with the vehicle provides you visibility to several key features (engine temperature, battery voltage, tachometer, and wheel speed).
5. How does Voyager Pro display speed?
All speed and distance data can be gathered using GPS or the wheel sensor. For the most accurate readout, we recommend using the wheel sensor.
6. How do I connect Voyager Pro to power?
Voyager Pro requires 12v DC power. Connecting Voyager Pro to AC power will damage the unit and void the warranty.
For applications where DC power is not available, Trail Tech offers an AC wall charger to charge the internal battery (internal battery life is ~45 minutes.)
7. Can Voyager Pro be turned on/off manually?
Yes, hold the upper left button to power Voyager Pro on/off.
8. How do I get the best GPS reception possible?
The internal antenna is designed for optimum reception when installed with a clear view of the sky. Some installations may require mounting under or near metal objects that would block the signal, and in these instances an external antenna (9000-EAA) should be installed.
9. Can I use the same sensors on my Voyager GPS with the new Voyager Pro?
Yes, the Voyager Pro uses the exact same sensors as all other Trail Tech gauges. Note: The power input on the Voyager GPS accepts a wider voltage range. Please double-check that it 2019s 12v DC power.
10. How does buddy tracking work?
Buddy tracking uses long range radio frequencies to connect multiple riders and display each rider as an icon on the screen.
The external antenna is required for buddy tracking to function properly.
11. How far is the range between riders when using buddy tracking?
The range varies depending up the terrain. We typically see between .5 and 1.5 miles of range. The range improves with better line of sight.
12. In what regions of the world is buddy tracking currently enabled?
North America, Central America, South America, and Australia / New Zealand.
Kit Contents
25mm Water Sensor: 7500-3076
Magnet Kit: 704-01
Wheel Sensor: 704-06
Mounting: 9200-1000
Power Lead: 9000-1011
Ignition Sensor: 9000-1021
Dock: 9200-DOCK
Buddy Tracking Antenna: 9200-V2V1
Are you in need of long hoses for your Trail Tech Portable Off-Road Air Compressor? Look no further! Our long hoses will be the perfect addition to your off-roading kit. Here are some reasons why:
Investing in a pair of long hoses for your Trail Tech Portable Off-Road Air Compressor is a smart move for any off-road enthusiast. Don't let a lack of reach hold you back from exploring the trails. Order your long hoses today and experience the convenience and versatility they offer!
Trail Techs TTO Temperature Switching Fan Kit monitors your KTM cooling system performance and automatically activates the fan to keep engine at optimum temperature range.
- Custom adjustment of temperature trigger point
- No cutting of fluid lines with included fin sensor
- 30 watt draw
- 4 Inch fan
- 12V DC ONLY
- Temperature: (-)40 to 300 Degrees Celsius
- Physical Weight: 652 Grams
- Physical Dimensions: 210 X 120 X 85MM
Contents
A Inch SPAL Fan: 7051-FN1
TTV Temperature Gauge: 732-S00
Radiator Bracket: 7051-BR06
Temperature Sensor: 7500-3005
Wire Harness: 732-WH1
New Design Resettable Front Button TTO is a digital tachometer and hour meter that works on all gasoline engine
The number of hours an engine has been running is critical to its maintenance schedule. Attach one to your motorcycle, ATV or lawn-mower and be aware of upcoming service requirements.
TTO is the smallest available meter at 50x25x14mm and has large, easy to read digits. Easily mount it to any surface using either the bolt-on (Screws not included) or peel-n-stick mounting options.
*Accumulated Run Time HRS 0-99999 Hours(Non-Resettable)
*Maintenance Reminder Run Time Wrench Icon with HRS 0-999 Hours (Resettable)
*Engine Speed RPM 0-19999 rpms (In Real Time)
*Max RPM Read Out - (Resettable)
*Internal Battery - Battery Life 5 Years
*Screen Size 25.5 x 13.4mm
*Physical Dimensions 25x50x14mm WxHxD
*Physical Weight 39.3 grams
Trail Techs TTO Temperature Switching Fan Kit monitors your Hondas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.
- Custom adjustment of temperature trigger point
- No cutting of fluid lines
- Fused Wire Harness
- 30 watt draw
- 4 Inch fan
- 12V DC ONLY
- Temperature: (-)40 to 300 Degrees Celsius
- Physical Weight: 652 Grams
- Physical Dimensions: 210 X 120 X 85MM
Contents
A Inch SPAL Fan: 7051-FN1
TTV Temperature Gauge: 732-S00
Radiator Bracket: 7051-BR03
Temperature Sensor: 732-TS1
Wire Harness: 732-WH1
The TTO Digital Temperature Gauge allows you to easily monitor your engine's temperature ensuring you that your engine is not over heating.
Battery Life 5 Years
Trail Techs TTV Temperature Switching Fan Kit monitors your KTM or Husqvarnas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.
Custom adjustment of temperature trigger point.
- Plugs into most stock KTM harnesses
- No cutting of fluid lines
- 30 watt draw
- 4 Inch fan
- 12V DC Only
- Temperature: (-)40 to 300 Degrees Celsius
- Physical Weight: 652 Grams
- Physical Dimensions: 210 X 120 X 85MM
Contents
4 Inch SPAL Fan: 7051-FN1
TTV Temperature Gauge: 732-S00
Radiator Bracket: 7051-BR05
Temperature Sensor: 7500-3005
Wire Harness: 732-WH1
Voyager Top Mount Protector
Protector works Voyager ONLY Not Voyager Pro.
Protector will include the External Antenna 9000-EAA
Trail Techs TTV Temperature Switching Fan Kit monitors your Hondas cooling system performance and automatically activates the fan to keep engine at optimum temperature range.
Custom adjustment of temperature trigger point.
- Fused Wire Harness
- No cutting of fluid lines
- 30 watt draw
- 4 Inch fan
- 12V DC ONLY
- Temperature: (-)40 to 300 Degrees Celsius
- Physical Weight: 652 Grams
- Physical Dimensions: 109 x 109 x 48mm
Contents
4 Inch SPAL Fan: 7051-FN1
TTV Temperature Gauge: 732-S01
Radiator Bracket: 7051-BR12
Temperature Sensor: 7500-3003
Wire Harness: 732-WH2
Voyager is the original Trail Tech Off-Road GPS, designed specifically to meet the needs of off-road riders. With Voyager you can download, record, and share maps while recording vital engine data. The 2.7 Inch TFT backlit display is ideal for viewing in any environment and gets easier to read in direct sunlight.
The map screen is monochrome, displaying maps in black and white. Plan routes on the web, then import to Voyager as gray routes ready to ride. As a new track is recording, a black line appears indicating where you have been.
Recorded tracks can be exported and combined to create entire riding areas. Need to edit trails? Voyager is supported by the free web app RIDELEADER.COM to help create, edit and save your epic rides. Download trails around your home or to plan your next vacation.
Voyager integrates with your vehicle using standard Trail Tech vehicle sensors, providing vital ride gauges such as engine temperature, RPM, battery voltage, speed/distance, and more.
At only 4.5 x 2.5 inches, Voyager is a great choice for many types of vehicles from adventure bikes to quads, UTVs and dirt bikes.
12V DC power required, make sure your vehicle has a battery.
Speed: 0-999 MPH
Distance: 0-250,000 mi
Altitude: 59,000 ft
Temperature: 0-260C
Accum. Run Time: 0-1,000,000 hr
GPS Sample Rate: 1-5 sec
External Power Input: 12V-60V DC
Internal Battery: 3.7V 900 mAh Li-Ion
Battery Life (Typical Use): 11 hours
Battery Life (100% Backlight): 6 hours
Battery Charge Time: 3-8 hours
Geodetic Datum: WGS84
GPS Chipset: MediaTek MT3329
Joystick: 5-Position High-Tactile
Wheel Sensor: Non-contact Magnet Sensor
Backlight: LED Group
Screen: 68.6mm Diagonal
Physical Dimensions: 113 x 62 x 28.2mm
Physical Weight: 172g
Max Waypoints: 300 waypoints
Max Track Points: 72,500 points
Max Route Points: 72,500 points
Max Tracks/Routes: 300 each
Kit Contents
7mm Fin Sensor: 7500-3003
Magnet Kit: 100-01
Wheel Sensor: 101-06
Mounting: 9000-1000
Power Lead: 9000-1011
Ignition Sensor Lead: 9000-1021
Micro SD Card Reader: 9000-MSDA
Micro SD Card: 9000-MSD2G
Protected by US Patent
Patent No. 8,708,205
Patent No. 8,848,356
Patent No. D635497
Patent No. D647434
Voyager is the original Trail Tech Off-Road GPS, designed specifically to meet the needs of off-road riders. With Voyager you can download, record, and share maps while recording vital engine data. The 2.7 Inch TFT backlit display is ideal for viewing in any environment and gets easier to read in direct sunlight.
The map screen is monochrome, displaying maps in black and white. Plan routes on the web, then import to Voyager as gray routes ready to ride. As a new track is recording, a black line appears indicating where you have been.
Recorded tracks can be exported and combined to create entire riding areas. Need to edit trails? Voyager is supported by the free web app RIDELEADER.COM to help create, edit and save your epic rides. Download trails around your home or to plan your next vacation.
Voyager integrates with your vehicle using standard Trail Tech vehicle sensors, providing vital ride gauges such as engine temperature, RPM, battery voltage, speed/distance, and more.
At only 4.5 x 2.5 inches, Voyager is a great choice for many types of vehicles from adventure bikes to quads, UTVs and dirt bikes.
12V DC power required, make sure your vehicle has a battery.
Speed: 0-999 MPH
Distance: 0-250,000 mi
Altitude: 59,000 ft
Temperature: 0-260C
Accum. Run Time: 0-1,000,000 hr
GPS Sample Rate: 1-5 sec
External Power Input: 12V-60V DC
Internal Battery: 3.7V 900 mAh Li-Ion
Battery Life (Typical Use): 11 hours
Battery Life (100% Backlight): 6 hours
Battery Charge Time: 3-8 hours
Geodetic Datum: WGS84
GPS Chipset: MediaTek MT3329
Joystick: 5-Position High-Tactile
Wheel Sensor: Non-contact Magnet Sensor
Backlight: LED Group
Screen: 68.6mm Diagonal
Physical Dimensions: 113 x 62 x 28.2mm
Physical Weight: 172g
Max Waypoints: 300 waypoints
Max Track Points: 72,500 points
Max Route Points: 72,500 points
Max Tracks/Routes: 300 each
Kit Contents
8mm Fin Sensor: 7500-3008
Magnet Kit: 100-01
Wheel Sensor: 101-06
Mounting: 9000-1000
Power Lead: 9000-1011
Ignition Sensor Lead: 9000-1021
Micro SD Card Reader: 9000-MSDA
Micro SD Card: 9000-MSD2G
Protected by US Patent
Patent No. 8,708,205
Patent No. 8,848,356
Patent No. D635497
Patent No. D647434
Temperature Sensor: Cylinder Head 10mm CHT Sensor for air cooled machines.
Type
Engine Temperature Air Cooled Machines
Spark Plug or Engine Bolt
Physical Features
Wire Length 550mm
(21%u201D)
Diameter 10mm