- Makeexpand_more
- radio_button_uncheckedBeta(10)
- radio_button_uncheckedGas Gas(13)
- radio_button_uncheckedHonda(76)
- radio_button_uncheckedHusaberg(6)
- radio_button_uncheckedHusqvarna(67)
- radio_button_uncheckedKawasaki(44)
- radio_button_uncheckedKTM(84)
- radio_button_checkedSherco(10)
- radio_button_uncheckedSuzuki(37)
- radio_button_uncheckedYamaha(85)
- Modelexpand_more
- radio_button_uncheckedSE FACTORY(7)
- radio_button_uncheckedSE-R(7)
- radio_button_uncheckedSE-R250 RACING(3)
- radio_button_uncheckedSE-R300 RACING(3)
- radio_button_uncheckedSE-SD250 SIX DAYS(3)
- radio_button_uncheckedSE-SD300 SIX DAYS(3)
- radio_button_uncheckedSE250 FACTORY(3)
- radio_button_uncheckedSE300 FACTORY(3)
- radio_button_uncheckedSEF FACTORY(7)
- radio_button_uncheckedSEF-R(7)
- radio_button_uncheckedSEF-R250 RACING(3)
- radio_button_uncheckedSEF-R300 RACING(3)
- radio_button_uncheckedSEF-R450 RACING(3)
- radio_button_uncheckedSEF-SD250 SIX DAYS(3)
- radio_button_uncheckedSEF-SD300 SIX DAYS(3)
- radio_button_uncheckedSEF-SD450 SIX DAYS(3)
- radio_button_uncheckedSEF250 FACTORY(3)
- radio_button_uncheckedSEF300 FACTORY(3)
- radio_button_uncheckedSEF450 FACTORY(3)
- Priceexpand_less
- min$0
- max$1,650
- Optionsexpand_less
- doneAnti-Mud Foam(13)
- doneBar Pads(12)
- doneBike Graphics(119)
- doneCleaners - Specialty(1)
- doneLift Straps(2)
- doneLower Fork Decals(19)
- doneProtective Decals(15)
- doneRace Numbers(7)
- doneRadiator Covers(8)
- doneSeats - Complete(29)
- doneSeats - Covers(190)
- doneSeats - Foams(45)
- doneSponsor Decal Sheets(13)
- doneSwing Arm Decals(12)
- doneUpper Fork Decals(11)
Blackbird Racing Seat Foams are made of rigid polyurethane foam, they are waterproof and fits perfectly with the original seat base and seat cover.
The polyurethane foam is produced using a chemical formula created for the aerospace industry so is of the highest quality. Thanks to the molecules with closed cells it also weighs less than the original seat foam.
15mm Higher then standard seat foam.
Firmer material then original seat foams.
Blackbird Racing Seat Foams are made of rigid polyurethane foam, they are waterproof and fits perfectly with the original seat base and seat cover.
The polyurethane foam is produced using a chemical formula created for the aerospace industry so is of the highest quality. Thanks to the molecules with closed cells it also weighs less than the original seat foam.
Standard height seat foam.
Firmer material then original seat foams.
The Double Grip 3 is the latest evolution of the gripper seat cover from BlackBird Racing.
The DG3 Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.
This specific effect is created by a high frequency welding of three different materials.
The DG3 Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy
The Pyramid Seat Cover is the original gripper seat cover by BlackBird Racing and arguably the best.
The Pyramid Seat Cover is created using one single piece of technical material especially designed with a pyramidal non-slip surface. An additional injection of a specially formulated gummy material realises the ultimate gripper seat cover.
One single piece of material, thus completely watertight
The Pyramid Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water proof and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy
The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.
The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.
The Double Grip 3 is the latest evolution of the gripper seat cover from BlackBird Racing.
The DG3 Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.
This specific effect is created by a high frequency welding of three different materials.
The DG3 Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy
The Pyramid Seat Cover is the original gripper seat cover by BlackBird Racing and arguably the best.
The Pyramid Seat Cover is created using one single piece of technical material especially designed with a pyramidal non-slip surface. An additional injection of a specially formulated gummy material realises the ultimate gripper seat cover.
One single piece of material, thus completely watertight
The Pyramid Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water proof and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy
