The Acerbis X-Seat debut set a new benchmark in the industry for its revolutionary design and technical features. Made entirely of one piece, the X-Seat has recently been updated and is now widely used by Motocross and Enduro riders who seek its lightness, exceptional durability, comfort and optimal grip.
- Fully external plastic shell with anti-slip grip.
- External plastic shell bonded with waterproof inner foam.
- Shell-bonded, expanded waterproof foam for maximum comfort.
- At 1,450 grams, lighter than leading competitors.
- Fully waterproof; the integrity of seat does not deteriorate after pressure washing.
- Rear seat clamps are Steel, while front brackets are Plastic. (Where Applicable)
- Air version features perforation for better cooling airflow.
Notes: Washable with pressure washer and soap and water only - do NOT use chemicals or solvents.
*Note: This Seat will have the same firmness or be firmer than a Standard Seat Foam.
The Acerbis X-Seat debut set a new benchmark in the industry for its revolutionary design and technical features. Made entirely of one piece, the X-Seat has recently been updated and is now widely used by Motocross and Enduro riders who seek its lightness, exceptional durability, comfort and optimal grip.
- Fully external plastic shell with anti-slip grip.
- External plastic shell bonded with waterproof inner foam.
- Shell-bonded, expanded waterproof foam for maximum comfort.
- At 1,450 grams, lighter than leading competitors.
- Fully waterproof; the integrity of seat does not deteriorate after pressure washing.
- Rear seat clamps are Steel, while front brackets are Plastic. (Where Applicable)
- Air version features perforation for better cooling airflow.
Notes: Washable with pressure washer and soap and water only - do NOT use chemicals or solvents.
*Note: This Seat will have the same firmness or be firmer than a Standard Seat Foam.
Acerbis X-Round Stabilizing Neck Collar - Kids
Characterised by an ergonomic design
Soft padding
Easily removable and washable lining
Easy to wear
Strap fast to close
Acerbis X-Round Stabilizing Neck Collar - Adult
Characterised by an ergonomic design
Soft padding
Easily removable and washable lining
Easy to wear
Strap fast to close
X-Road Mount Kit to suit Triumph & Ducati Models.
The X-ROAD brake lever guard is a small protector ideal for protecting the brake lever on a street bike from accidentally being engaged by another rider or in the event of a crash.
%u2022 Adjustable length to fit all types of levers
%u2022 Pre-curved design to guarantee maximum freedom of movement
%u2022 Use of high-strength Nylon to ensure stiffness and flexibility in case of contact
%u2022 Aerodynamic shield for protection of the lever
%u2022 Expander mounting kit included for handlebars with an inside diameter ranging from 13.6mm - 29 mm
The X-ROAD guards are small protectors ideal for protecting the levers on a street bike from accidentally being engaged by another rider or in the event of a crash.
%u2022 Adjustable length to fit all types of levers
%u2022 Pre-curved design to guarantee maximum freedom of movement
%u2022 Use of high-strength Nylon to ensure stiffness and flexibility in case of contact
%u2022 Aerodynamic shield for protection of the lever
%u2022 Expander mounting kit included for handlebars with an inside diameter ranging from 13.6mm - 29 mm
%u2022 Sold as a pair
Handguard- Dual Road X-Road X-factory additional mount kit.
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator
Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.
- Moulded openings to access the Filter Cover and Oil Cap
- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts
- Resistant to High Temperatures
- Slim Profile designed not to interfere with Boots and Riding Position
- Compatible with ACERBIS Skid plates
Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing
Left side: Provides protection to the Ignition Cover and Clutch Actuator