The BlackBird Racing additional Seat Step is easily installed by sticking it to the seat foam by means of a simple and efficient self-adhesive. It changes the seat foam shape to give the rider a better control on his bike, mainly during acceleration.
For a correct fitting it might be necessary to trim off any possible exceeding foam parts, thus adapting it to the various seat shapes.
It is made out of the same material of our seat foams so it is fully waterproof.
An efficient self-adhesive is supplied with the seat step
Note: A new seat cover may be required to fit over the higher seat step.
Blackbird Racing Seat Foams are made of rigid polyurethane foam, they are waterproof and fit perfectly with the original seat base and seat cover.
The polyurethane foam is produced using a chemical formula created for the aerospace industry so is of the highest quality. Thanks to the molecules with closed cells it also weighs less than the original seat foam.
15mm higher than standard seat foam.
Firmer material then original seat foams.
Blackbird Racing Seat Foams are made of rigid polyurethane foam, they are waterproof and fit perfectly with the original seat base and seat cover.
The polyurethane foam is produced using a chemical formula created for the aerospace industry so is of the highest quality. Thanks to the molecules with closed cells it also weighs less than the original seat foam.
Standard height seat foam.
Firmer material then original seat foams.
Blackbird Racing Forks Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
Two fork decals are included. One for the left fork and another for the right fork.
Size 22x17 cm each
Designed to protect the upper part of USD forks.
Clear finish
Blackbird Racing Forks Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
Two fork decals are included. One for the left fork and another for the right fork.
Size 22x17 cm each
Designed to protect the upper part of USD forks.
Carbon look finish
BlackBird Racing Pre-cut sponsor stickers made of adhesive PVC thickness 0,1 mm. Size around 50x35 cm. UV protection varnishing. They are ideal to decorate cars, vans, bikes, toolboxes, etc.
Blackbird Racing Swingarm Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
Two swingarm are included. One for the left side and another for the right.
Universal square design to fit most makes and models
45x5 cm each
BlackBird Racing Sticker Sheet is composed of a sheet made of back-printed crystall material (thickness 0,5 mm) containing pre-cut stickers of different sizes. Universal application on motorbikes or various surfaces.
Blackbird Racing Forks Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
Two fork decals are included. One for the left fork and another for the right fork.
Size 22x17 cm each
Designed to protect the upper part of USD forks.
Clear finish
BlackBird Racing Sticker Sheet is composed of a sheet made of back-printed crystall material (thickness 0,5 mm) containing pre-cut stickers of different sizes. Universal application on motorbikes or various surfaces.
Blackbird Racing Forks Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.
Our decals are Silk-screen printed using colour fast and brilliant inks.
Two fork decals are included. One for the left fork and another for the right fork.
Size 22x17 cm each
Designed to protect the upper part of USD forks.
Black finish
The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.
The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.
The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.
The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.
The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.
The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.
The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.
The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.
The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.
The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.
The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.
The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.
The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.
The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.
The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.
It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.
Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.
The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.
High Quality product made and assembled in Italy.