BlackBird Racing Complete Seat

Standard height

Includes

BlackBird Racing Gripper Seat cover

BlackBird Racing Seat Foam

Seat Base

Comes fully assembled

The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.

The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.

The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.

The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.

The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

Description

Get ready to kick your bike care into high gear with the Motorcycle Chain Care Kit.

This all-in-one grime fighting trio will leave your drivetrain smoother than a slow jam. Packed with our Motorcycle Chain Cleaner, All-Weather Chain Lube, and a Motorcycle Chain Brush, this kit comes with everything you've need to blast dirt and grime to oblivion and keep your chain in top-notch condition, no matter what the weather throws at you.

Included in the kit is our Motorcycle Chain Cleaner, our powerful, readily biodegradable formula that rapidly cuts through oil, grease, and dirt with ease, ensuring a deep clean that penetrates the chain; our Motorcycle Chain Brush which is designed to reach every nook and cranny of the chain, making drivetrain maintenance an effortless task; and our All-Weather Chain Lube which has been specially formulated to provide long-lasting protection, ensuring peak performance in all conditions - from dusty trails to rainy commutes.

Features:

Muc-Off 'Biodegradable Motorcycle Chain Cleaner' has been specifically formulated to rapidly remove dirt, grease lube and heavy chain grime using advanced solvents. Its unique formula breaks down oil and grease to leave the entire chain sparkling clean and contaminant free. Suitable for Standard O, X and Z-Ring chains.

• Quickly and safely remove dirt
• Rapid Grease shedding formula
• Leave the entire chain sparkling clean and contaminant free

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Rabaconda 10 inch Tyre Iron is the tire iron of choice when working with the Rabaconda Mini Tyre Changer. The short length makes the tool perfect for manipulating tire beads on or off of small diameter wheels. The 10 inch Tyre Iron is made out of a heat treated steel with a durable nickel coated surface to protect the tool from corrosion and rust. It also features a dura grip rubber handle for maximum grip with or without gloves and a wide but slim 'no pinched tubes' spoon end to easily get under the tyre and hug the rim.

If you dread the process of having to change a tire on your kids dirt bike, pit bike, or any dirt bike with small wheels and tires, the Rabaconda Mini Tire Changer is for you!

The Mini Tire Changer from Rabaconda is purpose built to make changing notoriously difficult 10-14 inch tires, and even up to 17 inch tires, with axle sizes from 10-24mm easier than ever before. Motocross dads everywhere can rejoice that the Mini Tire Changer makes the widely hated task of changing a tire or a mousse on a 50cc, 65cc, or 85cc dirt bike a piece of cake!

Designed to incorporate all of the benefits of the legendary Rabaconda Dirt Bike Tire Changer, the Mini Tire Changer is portable and lightweight; it can easily be broken down to fit into a small carrying bag and weighs only 27 lbs. It can be assembled quickly without the need of additional tools and is constructed around a comfortable working height of 28 inch.

Benifits

• Quickly change 10-17 Inch tires on kids 50cc, 65cc, and 85cc dirt bikes, pit bikes and more hassle free!
• Constructed around a comfortable working height
• Compact and easily assembled in seconds, no tools needed
• Easy tire dismounting with the integrated bead breaker
• Compatible with spoked and cast wheels along with tubeless, mousse, and regular tubed tire setups.
• Two center spindles included for different axle sizes - 10mm and 15mm with a 20mm adapter sleeve
• Rigid and durable construction
• Portable & lightweight
• Plastic wheel support pads to reduce risk of rim damage
• Tire iron pocket at comfortable height
• Includes a Rabaconda Mini Beadpal tire mounting tool
• Durable and compact carry-bag for convenient storage
• Heavy-duty bead breaker lever with comfortable grip
• Premium quality product. Made in the EU.

MOUSSE LUBE

To do a good job you need the right tools.

The MEFO gel is made of silicon oils with a low concentration of solvents, this gives it more durability of the gel and a better lubrication between the tyre and the mousse extending its life.

- Moulded openings to access the Filter Cover and Oil Cap

- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts

- Resistant to High Temperatures

- Slim Profile designed not to interfere with Boots and Riding Position

- Compatible with ACERBIS Skid plates

Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing

Left side: Provides protection to the Ignition Cover and Clutch Actuator

- Moulded openings to access the Filter Cover and Oil Cap

- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts

- Resistant to High Temperatures

- Slim Profile designed not to interfere with Boots and Riding Position

- Compatible with ACERBIS Skid plates

Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing

Left side: Provides protection to the Ignition Cover and Clutch Actuator

Say goodbye to bug splatters and tar stains with our powerful yet safe Bug and Tar Remover - the ultimate solution for removing stubborn insect residue and road grime from your motorcycle or vehicle's exterior.

Formulated with cutting-edge technology, our Bug and Tar Remover is specially designed to break down and dissolve tough deposits of bugs, tar, tree sap, and other road grime. It is a fast-acting and effective solution that saves you time and effort in maintaining your vehicle's appearance.

Features:

• Fast acting, powerful formula is tough on removing bugs and tar yet gentle on your motorcycle/vehicles finish
• Readily Biodegradable
• Active agent derived from a renewable source
• Safe to use on hard surfaces including paint, metal, chrome, hard plastics & glass*.
• Spray on formula is easy to use

1. Before using Bug and Tar Remover, ensure all surfaces are cool and out of direct sunlight a. Now thoroughly wash and dry the surface to be treated. This will ensure that any dirt, debris, or grime on the surface of the vehicle does not interfere with the effectiveness of the product or cause scratching when buffing.
2. Once the vehicle is clean and dry, shake the bottle to activate the formula, now spray on to the desired area* and allow it to penetrate the bug or tar for 1-2 minutes. For more stubborn baked-on contaminants, you may need to leave the product on for up to 5 minutes. (Do not leave for longer than this or apply in direct sunlight).
3. After the product has had time to work its magic, wipe away the residue with a clean, dry, microfiber cloth. Be sure to use a separate cloth for each area of the vehicle to prevent cross-contamination of the bug and tar residue.
4. Follow by protecting with one of our protective sprays or polishes.

Say goodbye to bug splatters and tar stains with our powerful yet safe Bug and Tar Remover - the ultimate solution for removing stubborn insect residue and road grime from your motorcycle or vehicle's exterior.

Formulated with cutting-edge technology, our Bug and Tar Remover is specially designed to break down and dissolve tough deposits of bugs, tar, tree sap, and other road grime. It is a fast-acting and effective solution that saves you time and effort in maintaining your vehicle's appearance.

Features:

• Fast acting, powerful formula is tough on removing bugs and tar yet gentle on your motorcycle/vehicles finish
• Readily Biodegradable
• Active agent derived from a renewable source
• Safe to use on hard surfaces including paint, metal, chrome, hard plastics & glass*.
• Spray on formula is easy to use

1. Before using Bug and Tar Remover, ensure all surfaces are cool and out of direct sunlight a. Now thoroughly wash and dry the surface to be treated. This will ensure that any dirt, debris, or grime on the surface of the vehicle does not interfere with the effectiveness of the product or cause scratching when buffing.
2. Once the vehicle is clean and dry, shake the bottle to activate the formula, now spray on to the desired area* and allow it to penetrate the bug or tar for 1-2 minutes. For more stubborn baked-on contaminants, you may need to leave the product on for up to 5 minutes. (Do not leave for longer than this or apply in direct sunlight).
3. After the product has had time to work its magic, wipe away the residue with a clean, dry, microfiber cloth. Be sure to use a separate cloth for each area of the vehicle to prevent cross-contamination of the bug and tar residue.
4. Follow by protecting with one of our protective sprays or polishes.

The BlackBird Racing Zebra Seat Cover was created at the requests of World Championship race teams wanting the best non-slip seat cover using the best the non-slip materials that would give the rider excellent control whilst racing.

The Zebra Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

The special Zebra pleats, are stitched on to the top grip material to give an extra physically raised ribbed grip area.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

Extra-Wide: Better Control of the Bike - 60mm

Easily Replaceable Stainless Steel Blades

Maximum Grip

Maximum Lightweight.

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

Plastic Kit Includes:

- Front Fender

- Front Number Plate

- Lower Fork Covers

- Radiator Shrouds

- Air Box Cover

- Rear Fender Side Panel

Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.

All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.

- Constructed of Impact and Abrasion Resistant Polyurethane.

- Allows for Greater Fuel Capacity.

- Slim Profile.

- Excellent Fit.

- Gas Cap and Vent Hose Included.

- Includes Mounting Kit & Hardware if Applicable.

Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.

All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.

- Constructed of Impact and Abrasion Resistant Polyurethane.

- Allows for Greater Fuel Capacity.

- Slim Profile.

- Excellent Fit.

- Gas Cap and Vent Hose Included.

- Includes Mounting Kit & Hardware if Applicable.

Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.

All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.

- Constructed of Impact and Abrasion Resistant Polyurethane.

- Allows for Greater Fuel Capacity.

- Slim Profile.

- Excellent Fit.

- Gas Cap and Vent Hose Included.

- Includes Mounting Kit & Hardware if Applicable.

Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.

All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.

- Constructed of Impact and Abrasion Resistant Polyurethane.

- Allows for Greater Fuel Capacity.

- Slim Profile.

- Excellent Fit.

- Gas Cap and Vent Hose Included.

- Includes Mounting Kit & Hardware if Applicable.

Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.

All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.

- Constructed of Impact and Abrasion Resistant Polyurethane.

- Allows for Greater Fuel Capacity.

- Slim Profile.

- Excellent Fit.

- Gas Cap and Vent Hose Included.

- Includes Mounting Kit & Hardware if Applicable.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro 

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro 

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro