The Rabaconda 10 inch Tyre Iron is the tire iron of choice when working with the Rabaconda Mini Tyre Changer. The short length makes the tool perfect for manipulating tire beads on or off of small diameter wheels. The 10 inch Tyre Iron is made out of a heat treated steel with a durable nickel coated surface to protect the tool from corrosion and rust. It also features a dura grip rubber handle for maximum grip with or without gloves and a wide but slim 'no pinched tubes' spoon end to easily get under the tyre and hug the rim.

This tire iron is specially chosen for using with the duck head of the Street Bike Tire Changer. After testing out a number of different shapes and lengths of tire irons, we've found this is the best one to accompany the street tire changer. 

Please note: One protective plastic cover and one 16" Street Bike Tire Iron is also included with the Street Bike Tire Changer.

Say goodbye to bug splatters and tar stains with our powerful yet safe Bug and Tar Remover - the ultimate solution for removing stubborn insect residue and road grime from your motorcycle or vehicle's exterior.

Formulated with cutting-edge technology, our Bug and Tar Remover is specially designed to break down and dissolve tough deposits of bugs, tar, tree sap, and other road grime. It is a fast-acting and effective solution that saves you time and effort in maintaining your vehicle's appearance.

Features:

• Fast acting, powerful formula is tough on removing bugs and tar yet gentle on your motorcycle/vehicles finish
• Readily Biodegradable
• Active agent derived from a renewable source
• Safe to use on hard surfaces including paint, metal, chrome, hard plastics & glass*.
• Spray on formula is easy to use

1. Before using Bug and Tar Remover, ensure all surfaces are cool and out of direct sunlight a. Now thoroughly wash and dry the surface to be treated. This will ensure that any dirt, debris, or grime on the surface of the vehicle does not interfere with the effectiveness of the product or cause scratching when buffing.
2. Once the vehicle is clean and dry, shake the bottle to activate the formula, now spray on to the desired area* and allow it to penetrate the bug or tar for 1-2 minutes. For more stubborn baked-on contaminants, you may need to leave the product on for up to 5 minutes. (Do not leave for longer than this or apply in direct sunlight).
3. After the product has had time to work its magic, wipe away the residue with a clean, dry, microfiber cloth. Be sure to use a separate cloth for each area of the vehicle to prevent cross-contamination of the bug and tar residue.
4. Follow by protecting with one of our protective sprays or polishes.

Say goodbye to bug splatters and tar stains with our powerful yet safe Bug and Tar Remover - the ultimate solution for removing stubborn insect residue and road grime from your motorcycle or vehicle's exterior.

Formulated with cutting-edge technology, our Bug and Tar Remover is specially designed to break down and dissolve tough deposits of bugs, tar, tree sap, and other road grime. It is a fast-acting and effective solution that saves you time and effort in maintaining your vehicle's appearance.

Features:

• Fast acting, powerful formula is tough on removing bugs and tar yet gentle on your motorcycle/vehicles finish
• Readily Biodegradable
• Active agent derived from a renewable source
• Safe to use on hard surfaces including paint, metal, chrome, hard plastics & glass*.
• Spray on formula is easy to use

1. Before using Bug and Tar Remover, ensure all surfaces are cool and out of direct sunlight a. Now thoroughly wash and dry the surface to be treated. This will ensure that any dirt, debris, or grime on the surface of the vehicle does not interfere with the effectiveness of the product or cause scratching when buffing.
2. Once the vehicle is clean and dry, shake the bottle to activate the formula, now spray on to the desired area* and allow it to penetrate the bug or tar for 1-2 minutes. For more stubborn baked-on contaminants, you may need to leave the product on for up to 5 minutes. (Do not leave for longer than this or apply in direct sunlight).
3. After the product has had time to work its magic, wipe away the residue with a clean, dry, microfiber cloth. Be sure to use a separate cloth for each area of the vehicle to prevent cross-contamination of the bug and tar residue.
4. Follow by protecting with one of our protective sprays or polishes.

Description

Get ready to kick your bike care into high gear with the Motorcycle Chain Care Kit.

This all-in-one grime fighting trio will leave your drivetrain smoother than a slow jam. Packed with our Motorcycle Chain Cleaner, All-Weather Chain Lube, and a Motorcycle Chain Brush, this kit comes with everything you've need to blast dirt and grime to oblivion and keep your chain in top-notch condition, no matter what the weather throws at you.

Included in the kit is our Motorcycle Chain Cleaner, our powerful, readily biodegradable formula that rapidly cuts through oil, grease, and dirt with ease, ensuring a deep clean that penetrates the chain; our Motorcycle Chain Brush which is designed to reach every nook and cranny of the chain, making drivetrain maintenance an effortless task; and our All-Weather Chain Lube which has been specially formulated to provide long-lasting protection, ensuring peak performance in all conditions - from dusty trails to rainy commutes.

Features:

Muc-Off 'Biodegradable Motorcycle Chain Cleaner' has been specifically formulated to rapidly remove dirt, grease lube and heavy chain grime using advanced solvents. Its unique formula breaks down oil and grease to leave the entire chain sparkling clean and contaminant free. Suitable for Standard O, X and Z-Ring chains.

• Quickly and safely remove dirt
• Rapid Grease shedding formula
• Leave the entire chain sparkling clean and contaminant free

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM

Acerbis X-H Gloves

• CERTIFIED GLOVES EN 13594:2015
  
• Glove with extreme precurved and comfortable fit without stitching on the fingertips
  
• Cuff adjustment
  
• Rubber reinforcement over the fingers
  
• Touchscreen gloves

• COMPONENTS: 70% Polyester, 20% Polyurethane, 10% Nylon
  MATERIALS:

• Back of hand Stretch fabric
  
• Palm Single panel in Nanofront®, outer reinforcement in tear- and abrasion-resistant synthetic leather, 3 mm padding and tear- and abrasion-resistant inner reinforcement

Replacement inner liner to suit Acerbis Steel Carbon Helmet 2206

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

Plastic Kit Includes:

- Front Fender

- Front Number Plate

- Lower Fork Covers

- Radiator Shrouds

- Air Box Cover

- Rear Fender Side Panel

Acerbis Grip Donut Pads

Sold as a pair

Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant material, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.

All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.

• Increased tank 23L
• Impact and abrasion resistant.
• Lighter than the original in steel.
• Ideal for both tourism and competition.
• Designed to maintain a narrow profile to ensure excellent driveability.
• Compatible with tubular engine guards / fairings.
• Perfectly compatible with the original pump and level switch.
• Possibility to assemble Quick Fill cap.
• E800033Z approved for use on EU road.
• Compatible with E5 E10 petrol.
• POLIETILENE   87%
• Steel 6%
• Nylon 3%
• Others 4%

With over 50 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

Plastic Kit Includes:

- Front Fender

- Front Number Plate

- Lower Fork Covers

- Radiator Shrouds

- Side Panels

- Rear Fender

With over 50 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

Plastic Kit Includes:

- Front Fender

- Front Number Plate

- Lower Fork Covers

- Radiator Shrouds

- Side Panels

- Rear Fender

With over 50 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

Plastic Kit Includes:

- Front Fender

- Front Number Plate

- Lower Fork Covers

- Radiator Shrouds

- Side Panels

- Rear Fender

With over 50 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

Plastic Kit Includes:

- Front Fender

- Front Number Plate

- Lower Fork Covers

- Radiator Shrouds

- Side Panels

- Rear Fender

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro.

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro.

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro 

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro 

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro 

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro 

Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.

All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.

- Constructed of Impact and Abrasion Resistant Polyurethane.

- Allows for Greater Fuel Capacity.

- Slim Profile.

- Excellent Fit.

- Gas Cap and Vent Hose Included.

- Includes Mounting Kit & Hardware if Applicable.

Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.

All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.

- Constructed of Impact and Abrasion Resistant Polyurethane.

- Allows for Greater Fuel Capacity.

- Slim Profile.

- Excellent Fit.

- Gas Cap and Vent Hose Included.

- Includes Mounting Kit & Hardware if Applicable.

Acerbis fuel tanks are designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service with the proper care.

All Acerbis fuel tanks will include an Acerbis Gas Cap, required Mounting Kit (If Applicable), and Vent Hose. Applications that require special fuel line Y-fittings and petcocks will come with the tank. EFI tanks do not come with a new fuel pump and are designed to accept the stock assembly.

- Constructed of Impact and Abrasion Resistant Polyurethane.

- Allows for Greater Fuel Capacity.

- Slim Profile.

- Excellent Fit.

- Gas Cap and Vent Hose Included.

- Includes Mounting Kit & Hardware if Applicable.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.