Protect your Motor Crankcase and Ignition/Clutch Covers against wear from Boots, Impacts, Dirt, Mud, and other Debris with Acerbis X-Power Cover Kits.

- Moulded openings to access the Filter Cover and Oil Cap

- Easy to install by utilising the original Crankcase and Ignition/Clutch Cover Bolts

- Resistant to High Temperatures

- Slim Profile designed not to interfere with Boots and Riding Position

- Compatible with ACERBIS Skid plates

Right side: Provides protection for the Clutch Cover, Water Pump, and Lower Casing

Left side: Provides protection to the Ignition Cover and Clutch Actuator

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

With over 40 years experience in manufacturing Replica Plastics, Acerbis is the Premier Company for Aftermarket Plastic within the Motorcycle Industry.

All Acerbis Replica Plastic has the Original Factory Shape and Colour based on Manufacturer Specs.

- Italian made and moulded.

- Plastics are constructed from Durable Gloss Polypropylene

- Highly Resistant Plastic, Quality Constructed. Prevents Cracking, Fading and Chalking.

- The same Plastics used by some of the Biggest Teams in Motocross, Supercross & Enduro including Factory KTM, Monster Energy Yamaha & Kawasaki, Rocky Mountain ATV/MC KTM More.

The Acerbis X-Seat debut set a new benchmark in the industry for its revolutionary design and technical features. Made entirely of one piece, the X-Seat has recently been updated and is now widely used by Motocross and Enduro riders who seek its lightness, exceptional durability, comfort and optimal grip.

- Fully external plastic shell with anti-slip grip.

- External plastic shell bonded with waterproof inner foam.

- Shell-bonded, expanded waterproof foam for maximum comfort.

- At 1,450 grams, lighter than leading competitors.

- Fully waterproof; the integrity of seat does not deteriorate after pressure washing.

- Rear seat clamps are Steel, while front brackets are Plastic. (Where Applicable)

- Air version features perforation for better cooling airflow.

Notes: Washable with pressure washer and soap and water only - do NOT use chemicals or solvents.

*Note: This Seat will have the same firmness or be firmer than a Standard Seat Foam.

*Mount sold separately and is required to fit this product to your motorcycle. Please see related products for mount kit options.

The all new Carbon Fibre X-Brake Vented disc cover was designed with more ventilation to help fight front brake fade. The durable Carbon fibre construction offers unparalleled protection for your front brake rotor and caliper.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skid plate.

The plastic skid plate does not alter the chassis rigidity.

Acerbis Off-road Helmet specifically designed for Adventure, Offroad, UTV, ATV and Touring purposes

- Micro-adjustable outer visor in polycarbonate

- Inner tinted sun visor

- Upper air intakes can be opened and back extractors ensure great aeration

- Wide air intake on the chin guard

- Removable and washable linings

- Quick release micro-adjustable strap buckle

- ECE/ONU 2205 certified

- Removable chin strap

- Removable transparent visor to use with off-road goggles

- Thermoplastic shell

*Mount sold separately and is required to fit this product to your motorcycle. Please see related products for mount kit options. .

The X-Brake Mini is a vented disc guard for mini bikes. The X-Brake Mini provides unparalleled protection, strength, and design. It features a Dual mould injected design to keep sticks, rocks, and other debris from damaging or becoming tangled in the front rotor. It also features ample venting to keep the brake cool in all conditions. The cover also provides protection to the brake caliper. Constructed of durable polypropylene and features a carbon fibre like texture.

Acerbis GORILLA Knee Guard Brace

- High-end Knee Guard Kneecap, tibia and lower femur guard made of elastomeric material which adapts to the leg%u2019s anatomy and absorbs shocks.

- Extreme freedom of movement and excellent torsional and flexural rigidity of the knee guaranteed by the double articulation system created by combining technopolymeric materials and steel inserts.

- Movable kneecap shell ensures wide range of movement.

- Removable and washable padding in soft neoprene.

- 3 adjustable straps.

- EN 1621-1/12 HOMOLOGATED.

This skid plate has been designed and built for easy and quick installation using existing mounting holes.

A preformed fit against the chassis and engine for protection against rocks, debris and helps restrict mud accumulation.

Includes a pre-drilled pattern on the inside for drilling holes for venting.

Material is lightweight, protective and absorbs engine noise instead of amplifying it compared to a metal skit plate.

The plastic skid plate does not alter the chassis rigidity.

Kite Parts Silicon Hoses

High quality silicone

Less yeld loss on the cooling system

Better resistance to high temperatures

High resistance to aging

Working temperature range -40 to 180 degrees

Max pressure 4 bar

Note: Some kits may require the elimination of the thermostat for correct instalation

Kite Parts Silicon Hoses

High quality silicone

Less yeld loss on the cooling system

Better resistance to high temperatures

High resistance to aging

Working temperature range -40 to 180 degrees

Max pressure 4 bar

Note: Some kits may require the elimination of the thermostat for correct instalation

Kite Parts Silicon Hoses

High quality silicone

Less yeld loss on the cooling system

Better resistance to high temperatures

High resistance to aging

Working temperature range -40 to 180 degrees

Max pressure 4 bar

Note: Some kits may require the elimination of the thermostat for correct instalation

Kite Parts Silicon Hoses

High quality silicone

Less yeld loss on the cooling system

Better resistance to high temperatures

High resistance to aging

Working temperature range -40 to 180 degrees

Max pressure 4 bar

Note: Some kits may require the elimination of the thermostat for correct instalation

Auto Ventilate Disc

Easy cleaning of the mud

Increased heat exchange surface

Constancy of performance even after long use

The X-ROAD brake lever guard is a small protector ideal for protecting the brake lever on a street bike from accidentally being engaged by another rider or in the event of a crash.

%u2022 Adjustable length to fit all types of levers

%u2022 Pre-curved design to guarantee maximum freedom of movement

%u2022 Use of high-strength Nylon to ensure stiffness and flexibility in case of contact

%u2022 Aerodynamic shield for protection of the lever

%u2022 Expander mounting kit included for handlebars with an inside diameter ranging from 13.6mm - 29 mm

The Acerbis X-Grip frame guard serves a dual purpose. First, it allows the rider to protect the frame of the motorcycle from wear. As a frame protector, it keeps the bike in better condition over time. But the genius of the Acerbis X-Grip frame guard comes in adding a second purpose: grip. Thats right, not only does the X-Grip serve as an excellent frame protector, it also makes it easier for a rider to hang on to the bike. As the name implies, its a frame guard that adds more grip for the rider.

The Acerbis X-Grip frame guard is made from a dual-injected mould, and thats where the key is. The outer plastic is durable polycarbonate thats what allows it to serve as an excellent frame guard. Meanwhile, the inner plastic is much more pliable (though still durable), and this is the piece that offers the incredible grip. Together, they create a frame guard that will make both bike and rider happy.

Features

- The Acerbis X-Grip frame guard allows the rider to both protect the frame of the motorcycle from wear as well as add more grip to the bike to hold onto.

- It is made from a dual-injected mould.

- The outer plastic of the frame protector is durable polycarbonate, while the inner plastic is durable (yet pliable) and offers incredible grip.

- Periodic cleaning behind the frame guard is recommended.

Sold as a Pair. All mounting hardware included.

The Acerbis Chain Slider is the simple recipe your bike needs to keep the chain in its place and your swing arm in one piece.

Acerbis applies the same excellent quality of their plastics to their chain sliders as well. Made of ultra-durable polyurethane, this chain slider preserves your chain and swing arm with its smooth-as-butter surface that practically eliminates unwanted friction. The tough construction means youll get plenty of hours filled with clatter-free riding and wont have to worry about replacing your Acerbis slider anytime soon. Installation is a breeze. Since this slider is super flexible, you can simply spread it and slip it onto your swing arm before bolting it in place. It even comes with a sticker.

The Acerbis Chain Slider does its job wonderfully. So keep your chain in check and your mind on other things with the Acerbis Chain Slider.

- Polyurethane Construction

- Meets or exceeds OEM Specifications.

- Quality Replacement for Stock Swing Arm-Mounted Chain Slider.

- Secures with Stock Fasteners

Acerbis X-STRONG Knee Guard

- Kneecap, tibia, and lower part of the femur are constructed in a sandwich of thermoplastic material and a padding that allows high-energy shock absorption (P.O.I. TECHNOLOGY).

- The system is double-articulated and adapts well to the anatomy of the knee. It ensures maximum movement with great torsional stiffness, combined with the attachment system which is made of 2 big neoprene bands.

- TRANSPORT BAG AND ELASTIC SOCKS INCLUDED.

- K, L EN 1621-1/2012 CERTIFIED FOR KNEE AND TIBIA.