Blackbird Racing Swingarm Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

Two swingarm are included. One for the left side and another for the right.

Pre-cut for perfect fit to the original swingarm of the bike

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Front Fender

Rear Fender

Lower Fork Covers

The Pyramid Seat Cover is the original gripper seat cover by BlackBird Racing and arguably the best.

The Pyramid Seat Cover is created using one single piece of technical material especially designed with a pyramidal non-slip surface. An additional injection of a specially formulated gummy material realises the ultimate gripper seat cover.

One single piece of material, thus completely watertight

The Pyramid Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water proof and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy

BlackBird Racing Rear Lift Strap

Designed to be the perfect grab handle to pull your bike or riding partners bike out of deep ruts, bog holes or up step hills.

Rear strap made of extra resistant Cordura provided with special seams and a tear-resistant elastic band.

It needs to be hard mounted to rear sub frame or fender using the supplied screws and washers.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Tank

Front Fender

Rear Fender

Note: Some bubbles in the decal will occur when applying decals to plastic fuel tanks. Fuel vapour coming through from inside the tank will cause bubbles in any decal applied to said tank. To help minimise this bubbling effect BlackBird Racing decals come with small holes on the tank part to help prevent fuel vapour being trapped behind the decal.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Tank

Front Fender

Note: Some bubbles in the decal will occur when applying decals to plastic fuel tanks. Fuel vapour coming through from inside the tank will cause bubbles in any decal applied to said tank. To help minimise this bubbling effect BlackBird Racing decals come with small holes on the tank part to help prevent fuel vapour being trapped behind the decal.

The Double Grip 3 is the latest evolution of the gripper seat cover from BlackBird Racing.

The DG3 Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.

This specific effect is created by a high frequency welding of three different materials.

The DG3 Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Front Fender

Rear Fender

Lower Fork Covers

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Front Fender

Rear Fender

Front Plate

Lower fork

Side panels

Blackbird Racing Forks Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

Two fork decals are included. One for the left fork and another for the right fork.

Size 22x17 cm each

Designed to protect the upper part of USD forks.

Clear finish

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shroud

Tank

Front Fender

Rear Fender

Note: Some bubbles in the decal will occur when applying decals to plastic fuel tanks. Fuel vapour coming through from inside the tank will cause bubbles in any decal applied to said tank. To help minimise this bubbling effect BlackBird Racing decals come with small holes on the tank part to help prevent fuel vapour being trapped behind the decal.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Front Fender

Rear Fender

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Tank

Front Fender

Rear Fender

Note: Some bubbles in the decal will occur when applying decals to plastic fuel tanks. Fuel vapour coming through from inside the tank will cause bubbles in any decal applied to said tank. To help minimise this bubbling effect BlackBird Racing decals come with small holes on the tank part to help prevent fuel vapour being trapped behind the decal.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Tank

Front Fender

Note: Some bubbles in the decal will occur when applying decals to plastic fuel tanks. Fuel vapour coming through from inside the tank will cause bubbles in any decal applied to said tank. To help minimise this bubbling effect BlackBird Racing decals come with small holes on the tank part to help prevent fuel vapour being trapped behind the decal.

Note: Picture shown is for graphic design reference only. Bike picture is XR600 but this decal is for XR250 and XR400 96-04

BlackBird Racing Traditional Handlebar Pad.

Fits traditional style bars with cross brace.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Front Fender

Rear Fender

Lower Fork Covers

The Double Grip 3 is the latest evolution of the gripper seat cover from BlackBird Racing.

The DG3 Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.

This specific effect is created by a high frequency welding of three different materials.

The DG3 Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

Blackbird Racing Forks Decals are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

Two fork decals are included. One for the left fork and another for the right fork.

Size 22x17 cm each

Designed to protect the upper part of USD forks.

Black finish

The Double Grip 3 is the latest evolution of the gripper seat cover from BlackBird Racing.

The DG3 Seat Cover has 5 raised traction stripes located at the rear of the cover offering a seamless ribbed grip area.

This specific effect is created by a high frequency welding of three different materials.

The DG3 Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water resistant and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy.

BlackBird Racing Pre-cut sponsor stickers made of adhesive PVC thickness 0,1 mm. Size around 50x35 cm. UV protection varnishing. They are ideal to decorate cars, vans, bikes, toolboxes, etc.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shroud

Tank

Front Fender

Rear Fender

Note: Some bubbles in the decal will occur when applying decals to plastic fuel tanks. Fuel vapour coming through from inside the tank will cause bubbles in any decal applied to said tank. To help minimise this bubbling effect BlackBird Racing decals come with small holes on the tank part to help prevent fuel vapour being trapped behind the decal.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Front Fender

Rear Fender

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shrouds

Front Fender

Rear Fender

The perfect seat cover to renew the look off the popular Honda XR600.

Made of synthetic material to give a non exaggerated anti-slip effect.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

The seat cover material is water proof and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy

The Pyramid Seat Cover is the original gripper seat cover by BlackBird Racing and arguably the best.

The Pyramid Seat Cover is created using one single piece of technical material especially designed with a pyramidal non-slip surface. An additional injection of a specially formulated gummy material realises the ultimate gripper seat cover.

One single piece of material, thus completely watertight

The Pyramid Seat Cover is produced with the best technologies on the market and is designed to replaced the original seat cover on your bike.

It fits perfectly with the shape of the original seat, even with higher seat foams of up to almost 2cm.

Designed to meet the need of having a greater grip on the seat during the acceleration and to help prevent the rider sliding back.

The seat cover material is water proof and the thread used for stitching is waterproof and rub-resistant.

High Quality product made and assembled in Italy

BlackBird Racing Pre-cut sponsor stickers made of adhesive PVC thickness 0,1 mm. Size around 50x35 cm. UV protection varnishing. They are ideal to decorate cars, vans, bikes, toolboxes, etc.

BlackBird Racing Pre-cut sponsor stickers made of adhesive PVC thickness 0,1 mm. Size around 50x35 cm. UV protection varnishing. They are ideal to decorate cars, vans, bikes, toolboxes, etc.

Blackbird Racing graphic kits are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

To obtain the best result when installing the decal we recommend the decal be warmed slightly so they are more pliable and then applied directly onto a clean dry surface. Do not use soaps or solvents, just clean up the surface with a dry rag or use our specific decal application spray that is sold separately. Please also see the video on the BlackBird Racing website for a helpful tutorial on apply decals and seat covers.

This kit includes decals for:

Radiator Shroud

Tank

Front Fender

Rear Fender

Note: Some bubbles in the decal will occur when applying decals to plastic fuel tanks. Fuel vapour coming through from inside the tank will cause bubbles in any decal applied to said tank. To help minimise this bubbling effect BlackBird Racing decals come with small holes on the tank part to help prevent fuel vapour being trapped behind the decal.

Blackbird Racing Decal Sheets are made using the very best materials. They are made of a high performance raw material called Crystall that is 0.5 mm thick and laminated with a super strong self adhesive, specifically designed for of off road use.

Our decals are Silk-screen printed using colour fast and brilliant inks.

Suitable to be applied on plastics and on most metals.

Easy to cut and adaptable to various surfaces.

The kit is composed of three sheets size 47x33 cm

Colour - Clear

Surface - Smooth

Tools displayed in image are not included