- Priceexpand_less
- min$0
- max$1,650
- Optionsexpand_less
- doneAirTag Holder(1)
- doneChain Lube(3)
- doneChain Lube - All Weather(3)
- doneChain Lube - Dry(2)
- doneChain Lube - Wet(2)
- doneCleaners(8)
- doneCleaners - Air Filter(1)
- doneCleaners - Concentrates(2)
- doneCleaners - Specialty(7)
- doneCleaning - Brushes(7)
- doneCleaning - Cloths(2)
- doneCleaning - Sponges(3)
- doneCleaning Kit(3)
- doneCleaning Kits - Moto(7)
- doneCleaning Kits - Rider(2)
- doneDisplay Stand(1)
- doneExhaust Plugs(1)
- doneGloves - Mechanics(1)
- doneHelmet Care(4)
- doneOils - Air Filter(1)
- donePersonal Care(5)
- doneProtection - Polish(2)
- doneProtection - Sprays(9)
Silicon Shine not only leaves your motorcycle looking factory fresh, but it also reduces dirt adhesion. Spray it under your mud guards to stop mud from sticking and make your next clean that little bit easier!
Features:
- Protects and leaves a sparkling shine on metal, plastic & rubber parts.
- Reduces friction on fork stanchions and rear shocks
- Silicon formula prevents grime build up on treated surfaces
- Cuts down on future cleaning and maintenance
Instructions for Use:
1. Shake can to activate silicon formula and apply Silicon Shine to a clean surface.
2. Using a microfibre cloth, buff the surface to leave a dry, sparkling shine.
Just remember not to apply Silicon Shine to your bike's tyre treads and braking surfaces!
Muc-Offs Wheel & Component Brush is shaped and contoured specifically to clean rims and spokes with ease. Its unique design features an impact resistant, dual density handle and durable nylon bristles.
NB: To maintain performance of all brushes avoid use with boiling water and on hot parts. We recommend using warm water and allowing all hot parts to cool before use.
Features:
- Ultimate Clean Companion
- Ideal for wheels and components
- Suitable for all types of bikes
- Rubberised handle
Our eBike All-Weather Chain Lube is a high-performance synthetic chain lube specifically designed for the hi-torque loads applied to an eBike chain. Our unique water repellent, non-fling formula penetrates deep into the chain link, to create a durable protective coating which guards against corrosion and metal to metal wear. A unique blend of extreme pressure additives ensures the lube can stand up to even the most powerful e-bike drivetrains. Our formula will provide lubrication for long distance, on & off-road riding in all conditions under high torque loads. Unrivalled lube intervals will give you maximum protection over long distances.
Features
- Specifically formulated for eBike chains
- For long-distance all-weather on/off-road riding
- High-performance synthetic formulation for maximum protection
- Fully degrease and dry chain.
- Shake can vigorously and apply lube ensuring every part of the chain is treated.
- Re-apply to ensure maximum protection.
- Avoid contact with brakes.
- Store in a cool dry place.
Why do I need a specific lube for my e-bike?
Higher torque loads put more strain on your eBike drivetrain, so we have formulated specific lubes to include our unique eBike lubricity additive pack that laugh in the face of the extra torque to withstand a beating from even the most powerful eBike drivetrains. These state of the art formulas all offer class leading corrosion protection, and are highly efficient in terms of friction reduction to ensure the maximum power goes into the going faster and is not lost in drivetrain inefficiencies. The All Weather, Ceramic Wet and Dry Weather lubes have been developed to withstand the high torque lubes that are put through an eBike chain keeping your e-machine running smoother for longer.
What do the high torque loads on an e-bike do to chain and how does the lube combat this?
The high torque loads on an e-bike will wear down the chain much quicker than on a normal bike due to the increased and instant surges in power from the motor. This puts more strain through the chain and chain rings which will lead to higher friction from more metal to metal contact, which will lease to wear, if the correct lube isn't used. Our e-bike Lubes were developed to combat this with their unique blend of synthetic oils, a high level of bespoke additives and Boron Nitride which mean they will last longer and reduce friction across the drivetrain, even under the increased loads.
If there is increased wear on the e-bike chain does using the eBike lube make the chain wear the same as on a normal none-bike?
Using our e-bike lubes will help to dramatically reduce fiction while riding and will keep the chain running smoother for much longer than a traditional lube, however there will always be higher stresses on the chain due to the power assisted motor reducing the life of any chain more so than on a normal bike.
Is the lubrication interval the same as a normal bike?
We would recommend cleaning and re-lubing your e-bike chain more often, as often as you can...after each ride if possible. Doing this will prolong the life of your chain and other drivetrain components which can be costly to repair.
What is Boron Nitiride, what does it do?
Boron Nitride is an advanced particle which is present in our lube. It offers increased levels of durability and wear resistance as well as excellent lubrication properties. It forms a stable tribofilm, which is important to achieve improved tribological performance needed from an ebike specific lube.
What's the ebike additive pack?
The ebike additive pack is the name we gave to the extra high levels of 'extreme pressure additives' which we have added to our ebike lubes to decrease wear, even under the higher torque loads of an ebike drive system. These help to provide increased wear protection on all treated parts
A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in dry and dusty conditions. Formulated with our unique eBike specific lubricity pack to handle the higher torque loads of an eBike drivetrain.
Features
- Creates a dry ceramic coating for increased durability and dry condition performance
- Contains Boron Nitride compounds
- Ceramic compounds provide ultra-low friction for unparalleled lubrication
- Non-dust attracting - excels in dry and dusty conditions
- Utilises biodegradable organic compounds
- Ideal for road and off-road
- Integral UV tracer dye - aids accurate application to ensure total protection.
- Fully degrease and dry chain
- Shake bottle vigorously
- Apply a moderate amount of eBike Dry Lube to the inside chain link while rotating the pedals in a reverse motion
- Ideally apply 3-4 hours before your ride
- Wipe away any excess lube using a microfibre cloth
Why do I need a specific lube for my e-bike?
Higher torque loads put more strain on your eBike drivetrain, so we have formulated specific lubes to include our unique eBike lubricity additive pack that laugh in the face of the extra torque to withstand a beating from even the most powerful eBike drivetrains. These state of the art formulas all offer class leading corrosion protection, and are highly efficient in terms of friction reduction to ensure the maximum power goes into the going faster and is not lost in drivetrain inefficiencies. The All Weather, Ceramic Wet and Dry Weather lubes have been developed to withstand the high torque lubes that are put through an eBike chain keeping your e-machine running smoother for longer.
What do the high torque loads on an e-bike do to chain and how does the lube combat this?
The high torque loads on an e-bike will wear down the chain much quicker than on a normal bike due to the increased and instant surges in power from the motor. This puts more strain through the chain and chain rings which will lead to higher friction from more metal to metal contact, which will lease to wear, if the correct lube isn't used. Our e-bike Lubes were developed to combat this with their unique blend of synthetic oils, a high level of bespoke additives and Boron Nitride which mean they will last longer and reduce friction across the drivetrain, even under the increased loads.
If there is increased wear on the e-bike chain does using the eBike lube make the chain wear the same as on a normal none-bike?
Using our e-bike lubes will help to dramatically reduce fiction while riding and will keep the chain running smoother for much longer than a traditional lube, however there will always be higher stresses on the chain due to the power assisted motor reducing the life of any chain more so than on a normal bike.
Is the lubrication interval the same as a normal bike?
We would recommend cleaning and re-lubing your e-bike chain more often, as often as you can...after each ride if possible. Doing this will prolong the life of your chain and other drivetrain components which can be costly to repair.
What is Boron Nitiride, what does it do?
Boron Nitride is an advanced particle which is present in our lube. It offers increased levels of durability and wear resistance as well as excellent lubrication properties. It forms a stable tribofilm, which is important to achieve improved tribological performance needed from an ebike specific lube.
What's the ebike additive pack?
The ebike additive pack is the name we gave to the extra high levels of 'extreme pressure additives' which we have added to our ebike lubes to decrease wear, even under the higher torque loads of an ebike drive system. These help to provide increased wear protection on all treated parts
A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in wet and harsh conditions. Formulated with our unique eBike specific lubricity pack to handle the higher torque loads of an eBike drivetrain. Ideal for: Chains, cables, shifters, derailleurs & pedals.
Features
- Specifically designed for the hi-torque loads applied to an eBike chain.
- Creates a ceramic coating for incredible durability and long distance performance
- Contains Boron Nitride compounds
- Ceramic compounds provide ultra-low friction for excellent efficiency
- Waterproof - excels in wet conditions
- Readily biodegradable
- Ideal for road and off-road
- Integral UV tracer dye - aids accurate application to ensure total protection.
- Fully degrease and dry chain.
- Shake bottle vigorously and apply lube ensuring every part of the chain is treated.
- Ideally apply 3-4 hours before your ride.
- Wipe off excess with a cloth.
- Avoid contact with brakes.
- Store in a cool dry place.
Why do I need a specific lube for my e-bike?
Higher torque loads put more strain on your eBike drivetrain, so we have formulated specific lubes to include our unique eBike lubricity additive pack that laugh in the face of the extra torque to withstand a beating from even the most powerful eBike drivetrains. These state of the art formulas all offer class leading corrosion protection, and are highly efficient in terms of friction reduction to ensure the maximum power goes into the going faster and is not lost in drivetrain inefficiencies. The All Weather, Ceramic Wet and Dry Weather lubes have been developed to withstand the high torque lubes that are put through an eBike chain keeping your e-machine running smoother for longer.
What do the high torque loads on an e-bike do to chain and how does the lube combat this?
The high torque loads on an e-bike will wear down the chain much quicker than on a normal bike due to the increased and instant surges in power from the motor. This puts more strain through the chain and chain rings which will lead to higher friction from more metal to metal contact, which will lease to wear, if the correct lube isn't used. Our e-bike Lubes were developed to combat this with their unique blend of synthetic oils, a high level of bespoke additives and Boron Nitride which mean they will last longer and reduce friction across the drivetrain, even under the increased loads.
If there is increased wear on the e-bike chain does using the eBike lube make the chain wear the same as on a normal none-bike?
Using our e-bike lubes will help to dramatically reduce fiction while riding and will keep the chain running smoother for much longer than a traditional lube, however there will always be higher stresses on the chain due to the power assisted motor reducing the life of any chain more so than on a normal bike.
Is the lubrication interval the same as a normal bike?
We would recommend cleaning and re-lubing your e-bike chain more often, as often as you can...after each ride if possible. Doing this will prolong the life of your chain and other drivetrain components which can be costly to repair.
What is Boron Nitiride, what does it do?
Boron Nitride is an advanced particle which is present in our lube. It offers increased levels of durability and wear resistance as well as excellent lubrication properties. It forms a stable tribofilm, which is important to achieve improved tribological performance needed from an ebike specific lube.
What's the ebike additive pack?
The ebike additive pack is the name we gave to the extra high levels of 'extreme pressure additives' which we have added to our ebike lubes to decrease wear, even under the higher torque loads of an ebike drive system. These help to provide increased wear protection on all treated parts
Our Two Prong Brush is ideal for reaching hard-to-shift dirt on spokes, discs, shocks, cranks, linkages and pedals. Its unique design features an impact resistant, dual density handle for maximum grip in wet conditions and durable nylon bristles. The twin brush heads can even be altered and repositioned to reach even the tightest areas!
NB: To maintain performance of all brushes avoid use with boiling water and on hot parts. We recommend using warm water and allowing all hot parts to cool before use.
Features:
- Great for reaching tough, hard to reach spots
- Ideal for forks, spokes, discs, shocks, cranks and pedals
- Suitable for all types of bike
- Rubberised ergonomic handle
- Durable nylon bristles
The Muc-Off eBike Ultimate Kit has everything you could ever need to look after your electric steed. The kit contains two of our eBike specific lubes, that have been formulated with a unique eBike lubricity additive pack that laughs in the face of the extra torque, and can withstand a beating from even the most powerful eBike drivetrains! Combine that with a bundle of cleaner, cloths, brushes and protective sprays and you've got yourself a party!
Features
- eBike Dry Lube - 50ml
- eBike Wet Lube - 50ml
- Nano Tech Bike Cleaner - 1L
- Drivetrain Cleaner - 500ml
- HCB-1 - 400ml
- MO-94 - 400ml
- Microcell Sponge
- Claw Brush
- Two Prong brush
- Soft Washing Brush
- Microfibre Cloth
- Shake bottle vigorously
- Spray Bio Drivetrain Cleaner all over the drivetrain including cassette, chainrings, chain and derailleurs
- Leave for up to 1 minute and agitate with a Claw Brush where required. (If you are using with a chain cleaning device, unscrew the trigger sprayer and fill the device with the formula)
- After agitation thoroughly rinse off with water making sure all of the formula has been removed
- Rinse the entire bike
- Spray Nano Tech Bike Cleaner over the bike frame and wheels and leave to soak for a few minutes before aggitating with a soft brush and rinsing with water
- Now apply HCB-1 to the bike frame and any electrical components, such as the battery casing and motor. Remove any excess with a Microfibre Cloth
- Allow the formula to cure for up to 24 hours for the best possible protection
- Ensure drive chain area is dry
- Apply a moderate amount of Wet/Dry Lube to the inside chain link while spinning pedals in a reverse motion
- Wipe away any excess lube
Introducing the Muc-Off eBike Essentials Kit, a small but mighty bundle of e-awesomeness! Packed with everything you need to look after your eBike, this kit will have you covered whatever the weather. Featuring cleaner, sponges, brushes and our epic eBike specific lubes that have been beefed up to take on the extra power from an electric motor, you'll be in safe hands to shred hard.
Features
- Nano Tech Bike Cleaner - 1L
- Bike Protect - 500ml
- eBike Dry Weather Lube - 50ml
- Bio Degreaser - 500ml
- Expanding Microcell Sponge
- Claw Brush
- Shake bottle vigorously
- Spray Bio Degreaser all over the drivetrain including cassette, chainrings, chain and derailleurs
- Leave for up to 1 minute and agitate with a Claw Brush if required
- After agitation thoroughly rinse off with water making sure all of the formula has been removed
- Rinse the entire bike with water
- Spray Nano Tech Bike Cleaner over the bike frame and wheels and leave to soak for a few minutes before aggitating with a Microcell Sponge and rinsing with water
- Now apply Bike Protect to the bike frame and polish with the Microfibre Cloth to disperse moisture
- Ensure drivetrain area is dry
- Apply a moderate amount of Dry Lube to the inside chain link while spinning pedals in a reverse motion
- Wipe away any excess lube
Cover all bases for looking after your electric machine with the Muc-Off CPL Kit! It's packed with everything you need to keep your ebike running sweet in all conditions. There's our eBike Wet-Weather Lube that'll take on the extra power from your electric machine, plus a bundle of other Muc-Off radness like cleaner, sprays and sponges!
Features
- eBike Wet-Weather Chain Lube - 50ml
- Nano Tech Bike Cleaner - 1L
- MO-94 - 400ml
- Microcell Sponge
- Rinse bike thoroughly before applying Nano Tech Bike Cleaner
- Spray Nano Tech Bike Cleaner onto the entire bike including components and leave for 3-5 minutes
- Agitate any stubborn grime with Microcell Sponge
- Rinse entire bike thoroughly with fresh, clean water
- After washing your bike with Muc-Off Nano Tech Bike Cleaner, apply Bike Protect to disperse remaining moisture
- Wipe away any excess fluid and leave to dry
- Ensure drive chain area is dry
- Apply a moderate amount of Wet Lube to the inside chain link while spinning pedals in a reverse motion
- Wipe away any excess lube
Muc-Off Technical Wash is a wash-in cleaner that safely removes dirt, grime, and odours from your technical gear. The unique, concentrated formula gives your garments a deep but safe clean, whilst protecting any existing DWR treatments and the breathability of the material, so it's perfect for freshening up and extending the life of those shred threads! It can be used on any technical or waterproof/water repellent fabric including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing.
Features:
- Gently removes dirt and grime from technical apparel
- Extends life and performance of garments
- Can be used on any technical or waterproof/water repellent fabric
- Can be used in the washing machine or applied by hand
- Suitable for use in hard and soft water areas
- Will not impact breathability of garments
- Biodegradable formula
- PFC-Free
- Not harmful for the environment or to you
- Safe to use on any garments with an existing DWR treatment
- Perfect to use as a pre-wash ahead of reproofing your technical apparel with Rain Shield Re-Proofer Spray or Wash-In Rain Shield Re-Proofer
Instructions for Use:
- Place garments to be washed into your washing machine.
- Shake bottle well to activate the formula.
- Use 25ml (5 x 5ml/0.16oz capfuls) per wash load.
- Dispense Technical Wash for Apparel directly into the detergent drawer of your washing machine, in place of normal washing detergent.
- Wash on a full cycle at 30°C/86°F or according to care label instructions.
- Allow garments to air-dry.
TOP TIP
If washing water repellent/waterproof garments we'd recommend re-treating with our Wash-In or Spray-On Rain Shield ReProofer after the wash to restore the water repellent finish. Follow the directions for use on the bottle for application details.
How many washes will I get per 300ml/10.14oz bottle?
If you use the suggested measure of 25ml-0.16oz per wash load you will get 12 washes per bottle.
When should I wash my technical apparel?
All technical apparel, especially waterproof apparel needs regular washing to keep the membranes breathing and performing at their best. If your apparel is starting to wet out or mud and grime is clinging to the surface, then it's time for a wash with our Technical Wash.
What wash temperature should I use when washing my garment?
We'd always recommend following your garment manufacturers care label instructions which will provide you with their recommended wash temperature. For an outdoor technical garment this will usually be 30C-86F or 40C-104F. Muc-Off Technical Wash is formulated to work at any temperature.
Riding in the rain? Grab our new Wash-In Rain Shield Re-Proofer. It's an easy-to-use wash-in treatment designed to restore factory levels of performance on all waterproof and breathable fabrics. The cutting-edge DWR treatment creates a tough barrier to keep your technical garments weatherproof, without impacting their breathability. It also helps to protect against mud and ground-in stains. And the best bit? It's safe for the environment, as it's water-based and doesn't contain PFCs!
Our state-of-the-art formula gives unrivalled protection within 24 hours of treatment. After application, water will bead and roll off, so you're protected to go and get rad in the harshest of conditions.
Features:
- Extends life and performance of garments
- Can be used on any technical or waterproof/water repellent fabric including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing
- Helps to repel wet mud and grime and protects against ground-in stains
- Will not impact breathability of garments
- PFC - Free
- Not harmful for the environment, or to you
- Can be used on any technical or waterproof/water repellent fabric including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing
Instructions for Use:
- We recommend cleaning your technical apparel with our Technical Wash before treating with Wash-In Rain Sheild Re-Proofer for the best results.
- Shake bottle well to activate the formula.
- For best results we recommend reproofing garments separately.
- Use 20 x 5ml caps per large item, or two smaller items. Use 5 x capfuls if hand washing.
- Pour the product directly into the detergent drawer of your washing machine
- Wash on a full cycle at 30°C/86°F or according to the care label instructions.
- Air-dry by hanging up and leave to dry overnight before wearing the garment in wet conditions again. Or tumble dry if the care label inside your garment permits.
TOP TIP - For an even more durable treatment, you can apply our Rain Shield Re-Proofer spray as a second treatment after using the wash in formula. This will build a secondary water repellent coating on garments used in very harsh/wet conditions.
N.B The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing frequency. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellence, due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric, then it is time to refresh with Re-proofer.
How many jackets/ garments can I treat per bottle?
Depending on how much you use the 300ml/10.14oz bottle will treat around 3 garments (XL sized jackets) per bottle.
How long will the treatment last after application?
The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric, then it is time to refresh with re-proofer.
Can you use Wash-In Rain Shield Re-Proofer on normal clothes?
The re-proofer will add a DWR coating to the fabric to provide some water resistance, but you cannot make non-waterproof fabric fully waterproof.
Muc-Off Foam Fresh is a highly effective, easy to use foam cleaner which is ideal for helmet liners or any soft material which comes into contact with the rider. Foam Fresh has an instant foaming action, which gently agitates dirt and grime away from the surface leaving a fresh Citric Burst fragrance. Even the cleanest looking riding gear benefits from this uniquely formulated product.
Its awesome for use on pads, gloves, shoes, liners and body armour.
Features:
- Agitates Dirt
- Fresh Citric Burst Fragrance
- Instant Foaming Action
Instructions for Use:
1. Remove heavily built-up dirt and mud prior to application.
2. Shake can vigorously and spray foam onto the desired area for cleaning.
3. Allow to soak in for a short time before wiping away excess with a clean, dry, cloth.
Our Luxury Microfibre cloths arent just cloths - theyre a gateway to effortless cleaning, drying and polishing power at your fingertips! Muc-Off Microfibre cloths contain an amazing split-fibre technology, that vastly increases surface area absorbency to easily eliminate smears and blemishes. As well as this, our microfibres trap dirt deep in the pile of the cloth - which helps to avoid the chance of swirling, which could ultimately lead to damaged paintwork. Because our cloths are made up of very small fibres, you'll be cleaning at a much deeper level, meaning that whether its interiors or exteriors, bikes or cars, you can be sure you are removing the dirt and grime!
The Muc-Off R&D team thought of everything and made sure that these handy cleaning cloths are machine washable, meaning they can be used time and time again!
Features:
- Super-soft, high quality cloth
- Safe to use on all surfaces
- Deep-pile material traps dirt deep in the pile of the cloth preventing scratches or swirling
- Split-fibre technology for increased absorbancy
- Machine washable
Reaching those hard-to-hit, fiddly areas when cleaning not only takes time but also means there is no guarantee that you've hit those all-important areas as thoroughly as possible.
We've got this said our Development Team!
Hello high-pressure. Keep your chain fresher than ever with our advanced Dry Chain Degreaser. It makes light work of oil build-up, grease and grime, without the need for rinsing. Its unique dry 'zero residue' formula means that after cleaning, it evaporates to leave the area clean as a whistle, with no residue.
It rips right through the toughest grime, including waterproof grease and chain lube. And we all know that a clean chain is a reliable chain, so you can get back to doing what you do best.
Features:
- New high-pressure turbo spray
- Easily cuts through tough grease in seconds
- No rinse, heavy duty formula
- Can be used on chains, gears, mechs and individual components
- Works on the toughest waterproof grease and chain wax
- Safe on O, X and Z-rings
Instructions for Use:
- Use in a well-ventilated area.
- Then use a brush or a rag to agitate any stubborn sections of grime.
- Then your chain will be clean and ready for lubrication or protective treatments.
- If you're unsure of surface compatibility or if your bike has non factory finishes test a small area before use.
- Store in a cool dry place.
Got a load of grime, mud or oil build up on your machine's chain and sprockets? Then reach for our Powersports Drivetrain Cleaner! This product will make light work of the toughest of residue from all drivetrain areas, thanks to its fast and effective biodegradable formula. So there's no need to worry next time you're out riding on a muddy or wet day, as we've got you covered.
Product Information
PLEASE NOTE: Not recommended for non-factory finishes. For best results always test an inconspicuous area before use. Use with caution on painted surfaces. Do not leave on carbon fibre for longer than instructed. Always ensure parts are fully cooled before using. Store in a cool dry place.
DANGER: Keep out of reach of children. May be fatal if swallowed and enters airways. Causes skin irritation. Causes serious eye irritation. Wear protective gloves/eye protection. IF SWALLOWED: Immediately call a POISON CENTER/doctor. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Do NOT induce vomiting. IF ON SKIN: Wash with plenty of water/soap. If eye irritation persists: Get medical advice/attention.
Features:
- Biodegradable*
- Can be used on all motorcycles, quads, ATVs and UTVs
- Suitable for standard O, X, Z ring chains
- Water-soluble formula
- Fast and effective grease cutting formula
- Removes all chain oil and wax residue from drivetrain and swingarm
- Safely eliminates drive chain contaminants
- Ideal for use with chain cleaning brushes and chain cleaning devices
- Trigger spray included for easy application
- Deep cleans all drive chain areas in seconds
- Safe on metal components, hard plastic, rubber and seals
*Only contents are readily biodegradable.
Instructions for Use:
- Shake bottle vigorously.
- Spray all over the drive chain including chain, sprockets, rings and other drivetrain parts.
- Leave for up to 1 minute and agitate with a brush if required.
- After agitation thoroughly rinse off with water making sure all of the formula has been removed.
- Now apply Muc-Off MO-94 to disperse moisture before applying a chain lubePROJECT GREENProject Green is our never-ending commitment to deliver a multitude of environmentally-focussed improvements across our business. We love the planet we ride on, it's our playground, and we're driven to protect it for everyone.
This product has a Project Green credential; meaning that it's either biodegradable, refillable, reusable, or all three!
Muc-Off Speed Polish is a quick, easy to use all in one motorcycle polish and wax. It contains pure Carnauba (the hardest naturally occurring wax) for durability and Beeswax to ensure a deep, glossy shine on your entire bike. Its been specifically formulated to leave a hydrophobic water resistant barrier, on all of your motorcycle's bodywork and metal parts. Now with Bubblegum Fragrance!
Features:
- Quick and easy application
- Leaves a hydrophobic water resistant barrier
- Contains pure Carnauba (the hardest naturally occurring wax)
The Muc-Off Ultimate Motorcycle Cleaning Kit covers all the bases when it comes to cleaning, protecting and lubing your motorcycle. This kit isnt style specific either with all the essentials for Road & Off Road riding. Complete with our award winning Motorcycle Cleaner, Microcell Sponge, Soft Washing Brush, Detailing Brush, Two Prong Brush, Claw Brush, Microfibre Cloth, Motorcycle Protectant & Motorcycle Speed Polish, this kit is the perfect Birthday or Christmas gift for any motorbike fanatic!
NB: To maintain performance of all brushes avoid use with boiling water and on hot parts. We recommend using warm water and allowing all hot parts to cool before use.
Whats Included:
- Heavy Duty Washer / Storage Tool Box included
- Microfibre Cloth
- Two Prong Brush
- Detailing Brush
- Soft Washing Brush
- Claw Brush
- Microcell Sponge
- Motorcycle Protectant
- Motorcycle Speed Polish
- Nano Tech Motorcycle Cleaner
Muc-Off Light Up Dealer Display Stand
Get the HD view for your goggles or helmet visor with our state-of-the-art cleaning kit.
Are you tired of cleaning your helmet and goggles with pieces of tissue or the sleeve of your jersey? Then this kit's for you! The Visor, Lens and Goggle cleaning Kit is ideal for keeping in your ride pack for quick and safe cleaning on the move. It quickly removes dust, mud, insects, soot and oily residue from your helmet and goggles leaving a streak free finish.
Each kit contains a premium quality microfibre cloth that has been specifically designed to clean delicate finishes. The pack also includes a 30 mL spray bottle containing an advanced pH balanced, biodegradable cleaning formula, as well as a luxury microfibre cloth.
Helmet, Visor & Goggle Cleaner
- Formulated using de-ionised water
- pH neutral formula as recommended by helmet manufacturers
- Free from solvents and harmful chemicals
- 100% biodegradable
- Ideal for motorcycle goggles
- Ideal for cycling glasses and goggles
- Ideal for snowboard and ski goggles
Helmet & Visor Microfibre Cloth
- Designed for delicate finishes
- Premium quality microfibre
- Ideal size for carrying around
- Machine washable
- Step 1 - Spray Visor, Lens & Goggle Cleaner onto the surface.
- Step 2 - Allow formula to soften any hard contaminant particles.
- Step 3 - Gently wipe with a clean microfibre cloth
- Helmet, Visor & Goggle Cleaner 30 mL
- Helmet & Visor Microfibre Cloth.
Been shredding so hard that your kit has started to smell? You need Muc-Off Anti-Odour Spray! It's a highly effective, easy to use anti-odour spray that uses SILVERPLUS® silver ion technology.
It's ideal for removing odour caused by bacteria from body armour, shoe lining, gloves, pads or any soft material, synthetic fibre or textile that comes into contact with your skin and starts to smell over time.
Our spray leaves a long-lasting hygienic finish that instantly freshens your equipment. It's perfect for using while travelling, to help protect you and your kit when it's repeatedly used and can't be washed on the go.
Not only will it stop your kit smelling like a skip, but it'll even help it last longer!
Features
- Triple effect odour remover using SILVERPLUS® silver ion technology
- Effective against odour caused by bacteria for functional freshness
- Suitable and safe to use on most riding equipment and textiles (technical, sportswear, socks, shoes, body armour, pads, body armour and gloves made from textile or leather)
- Suitable to use on leather/suede/cotton/polycotton/softshell/technical fabrics/synthetics*
- Gentle on fabrics and skin when dry
- Provides freshness for up to 10 washes
- Perfect for staying clean and fresh during periods of intense activity such as multi-day bike park sessions, or adventure races when it's harder to wash your kit
- Easy to use spray on application in a 250ml spray bottle
*Check with equipment manufacturer care instructions before use.
Storage
- Store in a cool, dry place. Do not freeze or allow to frost.
- Use in a well-ventilated area
SAFETY INFORMATION
- Keep out of reach of children
- DO NOT USE ON ANY HEADWEAR INCLUDING HELMET LINERS.
- DANGER: Causes serious eye damage
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- FIRST AID: after inhalation: Supply fresh air; consult doctor in case of complaints.
- CONTAINS: Docusate sodium, Ethanol, Silver Chloride
- Ensure the item you are applying the spray to is clear of heavy mud/soiling before application.
- Shake the bottle vigorously before use to activate the formula.
- Spray directly onto desired area to neutralise odour.
- Absorb any excess spray with a clean microfibre cloth.
- Allow to air dry fully before use.
- We recommend leaving for 24 hours drying time before using the item it has been applied to.
- Can be reapplied as necessary. As an example, we would recommend reapplying every 3-6 months, dependant on usage and temperature range. Hot climates can require more frequent application.
we recommend reapplying every 3-6 months, dependant on usage and temperature range. Hot climates can require more frequent application.
How long will the treatment last after application?
This all depends on usage and climates using your equipment in but overall the treatment provides freshness for up to 10 washes but can be easily applied should items start to smell again due to continual use in warmer climates. Even small SILVERPLUS® quantities are sufficient to permanently control odour-causing bacteria in textiles.
Are there any textiles/fabrics this isn't safe to use on?
Only Polypropylene is more difficult to treat, the fibre surface can be too slippy for the treatment to adhere to.
Don't let your bottom end get wet with the new Muc-Off Exhaust Bung! Made from a two-part flexible silicone rubber core and sleeve, it creates an awesome leak-proof seal to prevent water or other contaminants from getting into your exhaust pipe whilst you're cleaning or maintaining your machine. It's both 2 and 4-stroke compatible thanks to its removable two-part design.
It's super easy to twist into place and comes with a handy lanyard to make removal easy!
Features:
- 2 and 4-stroke compatible thanks to removable 4 stroke bung sleeve
- Tapered design fits most exhaust diameters
- Silicone rubber core construction is sturdy and durable
- Supplied with lanyard for easy removal and storage
- Prevents water or contaminates entering the exhaust during cleaning
- Protects your engine
- Ensure the exhaust is fully cooled before use
- For 2-stroke exhaust remove the black silicone sleeve from the bung - it simply pops off!
- For 4-stroke exhaust keep the black silicone sleeve on the bung.
- Insert and twist the exhaust bung into the end of the exhaust to form a perfect seal.
- Carry out your cleaning and maintenance routine.
- Always remove before starting the engine!
Storage: Store in a cool, dry place
Frequently Asked Questions:
What happens if I start the engine with the exhaust bung in?
You risk shooting the bung out of the exhaust. We always recommend removing the exhaust before starting the engine.
Is the bung resistant to cleaning products and degreasers?
Yes, silicone is generally chemically inert.
How can I clean my exhaust bung?
If the bung gets dirty over time it can be cleaned down with our Bike Cleaner and dried off with a clean microfibre cloth.
How long can I leave it in the exhaust (engine off)?
Indefinitely and is ideal for long term storage but we would always recommend that the exhaust is fully cooled before placing into the exhaust.
How is this product sustainable?
The product is designed to last a lifetime of use. At the end of its life, silicone can be recycled, these services may vary depending on location. Packaging is all card which can also be recycled easily.
The Muc-Off High-Performance Air Filter Oil boasts a non-chlorinated, low-viscosity formula, it's guaranteed to maximise performance, increase the longevity of foam air filters and improve engine life in all off-road weaponry.
Developed to provide the highest level of engine protection, even when you're going hard in the toughest of conditions. Our proprietary formulation contains polymeric additives which provide a hyper-tacky surface to resist airborne sand, dust, water, mud and grime. It helps ensure your engine is protected, whilst maintaining the ability to breathe freely in the most brutal conditions.
- Inherently biodegradable*
- Maximises airflow for the highest possible performance
- Prevents dust, grime and water from entering engine
- Low viscosity, super tacky formula easily penetrates filter
- Helps to extend engine life
- Fast evaporating means no long waits to re-assemble filter
- Wearing workshop gloves, apply up to 100ml of oil and massage into filter OR pour the oil in a tub and fully submerge the filter entirely in the oil.
- Ensure the entire filter is coated on both the inside and outside surfaces. The red dye helps to easily identify the protected areas.
- Gently squeeze out any excess oil.
- Allow filter oil to evaporate for 10 minutes and gently squeeze any excess.
- Now it's ready for reassembling into your air airbox.
Braving the elements? Then grab our new Rain Shield Re-proofer spray. It creates a cutting edge DWR (Durable Water Repellent) layer on all types of technical clothing.
It is a simple to use 'spray on' waterproofing treatment, designed to restore factory levels of performance on all waterproof and breathable fabrics. It uses the latest technology to reduce the surface tension of the fabric and provide the very best waterproofing without impacting the breathability of fabrics. It also helps to protect against mud and ground-in stains. And the best bit? It's safe for the environment, as it's water-based and doesn't contain PFCs!
Our state-of-the-art 'spray on' formula gives unrivalled protection within 24 hours of treatment. After application, water will bead and roll off, so you're protected to go and get rad in the harshest of conditions.
Features:
- PFC free, water-based formula
- Not harmful for the environment or to you
- Helps to repel wet mud and grime and protects against ground-in stains
- Will not impact breathability of garments
- Extends life and performance of garments
- Easy to apply, supplied in a spray bottle
- Can be used on any technical or waterproof/water repellent fabric including Goretex®, Polartec®, Pertex®, eVent®, softshell clothing, hardshell clothing and down-filled garments
- Will treat 1-2 garments per bottle!
Instructions for Use:
- Shake bottle well before use to activate the formula.
- Spray all over a clean, damp garment from 10-15cm away until garment is fully treated. (We would recommend using a technical performance wash to clean the garment before application. Always follow the washing instructions on the label.). We recommend spraying in a well-ventilated, dry area.
- Remove any excess treatment with a clean cloth.
- . Allow treatment to cure. Air dry by hanging up and leave to dry overnight before wearing garment in wet conditions again.
- The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with re-proofer. Best applied to a clean, damp garment for optimum results
Depending on how much you use the 250ml bottle will treat around 2 garments (XL sized jackets) per bottle.
How long will the treatment last after application?
The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing.
All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with re-proofer.
Can you use Rain Shield on normal clothes?
The spray will add a DWR coating to the fabric to provide some water resistance, but you cannot make non-waterproof fabric fully waterproof.
The unique formula breaks down unwanted particles, which can often leave your braking performance compromised. It has added conditioners that rehydrate the Disc Brake pad to dramatically reduce brake squeal and prolong the disc brake life.
The Muc-Off Disc Brake Cleaner leaves motorcycle brake discs and other braking parts clean and contaminant free with its re-hydrating capabilities.
Features:
- Safe on all brake parts
- Safe on Carbon Fibre
- Improves braking performance
- Removes brake dust, oil, grease and grime
- Dramatically reduces brake squeal
- Prolongs disc pad life
Instructions for Use:
1. Shake can vigorously
2. Use in a well ventilated area
3. Apply to brake area so pads and discs are treated
4. Allow cleaner to evaporate
5. Wipe off excess with a clean dry cloth
Ride hard, clean easy! Say hello to the Muc-Off Powersports Bucket, the ultimate way to freshen up your machine. It's the perfect tool for helping to keep your paintwork scratch-free, as its innovative Filth Filter sits at the bottom of the bucket to trap dirt and prevent it from getting back onto your sponge or brush whilst cleaning. And to sweeten the deal we've filled it up with an epic range of Muc-Off products, there's everything from cleaners to lubes, brushes to protective sprays - so you're covered to get out there and twist the throttle on the cleanest bike around!
- The Muc-Off Dirt Bucket Kit is the coolest bucket in the world!
- Features innovative Filth Filter that traps dirt at the bottom of the bucket, preventing sponge contamination
- Holds up to 13 litres of water
- Made from tough, durable Copolymer plastic
- Features a selection of the most popular Muc-Off powersports products
- Screw top lid to keep contents contaminant free
Whats Included:
- Powersports Bucket with filter filter
- Nano Tech Motorcycle Cleaner - 1L
- Punk Powder Twin Pack - makes 2L of Nano Tech Motorcycle Cleaner!
- Motorcycle Chain Brush
- Super Soft Wash Brush
- Wheel & Component Brush
- Grey Microfibre Cloth
- 2-in-1 Microfibre Wash Mitt
- Motorcycle Protectant - 500ml
- Motorcycle All-Weather Chain Lube - 400ml
- Motorcycle Silicon Shine - 500ml
- Powersports Drivetrain Cleaner - 500ml
Muc-Off Waterless Wash is a highly advanced, easy to use spray which cleans and polishes in seconds without the need for water. It details your whole bike, motorcycle or car in seconds leaving behind a streak free shine. Its innovative formula is designed to encapsulate any surface dirt to prevent scratching.
Use it to remove light contaminants in between major washes.
Features:
- Cleans and polishes in one application
- No need for water!
- Long lasts lustre
- No residual dust or streaks
- Non-sticky
- Powder free
- Suitable to use on bicycles, motorcycles, cars & R.Vs
Helmet, Visor & Goggle Cleaner quickly and safely removes dirt, dust, grime, snow, sweat and oily residue from all helmets, eye wear and goggles. Its been formulated using de-ionised water as recommended by many helmet manufacturers and its safe to use on all lens materials including polycarbonate!
Visor, Lens & Goggle Cleaner is also anti-bacterial and uses pH neutral soaps. And you don't have to worry about the formula either! Its fully biodegradable and contains no solvents or harmful chemicals.
Its perfect for cleaning motorcycle goggles, cycling glasses and goggles as well as snowboard and ski goggles.
Features:
- Formulated using de-ionised water
- pH neutral formula as recommended by helmet manufacturers
- Free from solvents and harmful chemicals
- 100% biodegradable
Instructions for Use:
1. Spray Visor, Lens & Goggle Cleaner onto the surface.
2. Allow formula to soften any hard contaminant particles.
3. Gently wipe with a clean microfibre cloth.
Our Premium Microfibre Detailing Cloth is composed of a premium-quality, super-soft microfibre material that has been specifically designed to clean delicate finishes. It's the ideal size for cleaning on the move, and we've even made sure it's machine washable!
Features:
- Amazing split fibre technology vastly increases surface area absorbency, eliminating smears or blemishes
- The most advanced bodywork and glass finishing cloth on the market
- Use after washing to remove water drops, spots and smears
- Super soft! Gentle on all plastic and painted surfaces
Kick single-use plastic in the nuts! We take caring for our planet as seriously as our riding, so we wanted to create the ultimate bike cleaning bundle that has the lowest possible impact on the environment.
Included in the bundle you'll find two sachets of our incredible new Punk Powder, which is the world's first plastic-free bike cleaner that uses 92% less packaging than two, 1-litre bottles of regular Bike Cleaner! Our all-new Bottle For Life is a recyclable tough aluminium spray bottle that'll stand the test of time and grime! It comes with a non-toxic, food-grade silicone base to protect the bottle, so it'll last even longer if dropped (while protecting any surface it's dropped on!) and offer increased stability when placed on uneven ground. It's also compatible with our Muc-Off Pressure Washer snow foam lancer attachment.
The even cooler bit is you can order replacement Punk Powders that arrive in a letterbox friendly eco pack, which contains zero plastic, so you won't need to increase any future plastic consumption every time you need to buy more bike cleaner. So, get out there, shred until your heart's content, then clean off the grime knowing you have left behind the smallest possible plastic footprint.
Product Information:
- Made from aluminium
- Designed to last for life
- Easy to recycle
- Non-toxic, food grade silicone base protects the bottle and bike if dropped!
Storage
Unused sealed sachets should be stored in a well-ventilated, dry place and protected from moisture, heat and direct sunlight. Can be stored for up to 3 years. Warning: Causes severe eye irritation. Keep out of reach of children. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Contains: Anionic surfactants 15-30%.
Features:
- 100% plastic-free packaging
- Readily biodegradable
- 100% water-free
- Refill your Bottle For Life and help to eliminate plastic waste
- 92% saving in packaging compared to 2 x 1L Nano Tech Bike Cleaner
- 100% environmentally friendly ingredients, including plant-based raw materials
- Supplied in a compostable sachet and printed with vegetable inks
- FSC recycled card box containing 2 x sachets - that makes 2L of bike cleaner
- Safe on all parts and surfaces including carbon fibre
- Will not harm seals, cables, disc brake pads or rotors
- Alkaline-based and free from alcohol, CFCs, solvents or acids
- Vegan & vegetarian friendly
- Bottle for life is compatible with our Muc-Off Pressure Washer snow foam lancer attachment.
- Cruelty-free, not tested on animals
- Dissolves easily in any type of water. Cold, warm and hot. Hard or soft
- Grab your empty old bottle of Muc-Off. (You may need a pair of adjustable pliers to remove the trigger from the bottle). Or purchase our Bottle for Life.
- Fill up to the shoulders of the bottle with 1 litre of lukewarm water for faster formula activation!
- Carefully cut one corner of the sachet open along the diagonal cut lines.
- You can carefully pour the sachet straight into the top of the bottle. Or using the box, fold the inside of the lid together using the printed lines as a guide and use this as a funnel to pour the powder into your bottle. (Please see our video for full instructions on this.
- Screw your spray trigger back onto the top of the bottle. Ensure it's tight!
- Shake the bottle vigorously for 30-60 seconds to activate the formula. If you notice any undissolved powder simply keep shakin' it!
- Go clean that filthy bike!
- 4 x 30g Punk Powder sachets (makes 4x litres of bike cleaner)
- 1 x Aluminium Bottle For Life
- 1 x Bike cleaner spray trigger
- 1 x Silicone base to protect the bottle base
Punk Powder Bike Cleaner - Quad Pack makes 4x litres of bike cleaner!
Some bike cleaners out there have a carbon footprint bigger than the Jurassic Park T-Rex, but not us. We're always looking for new ways to reduce our plastic and water usage along with our CO2 output; so we got cracking on the epic task of developing the ultimate powder-based cleaner! Over three years, we tested and tinkered with hundreds of versions until we landed on the one. Formulated using the latest technological advancements and the finest biodegradable ingredients (75% of which are plant-based!) our newest creation is not only incredibly safe for you and the environment, but also for all bikes and finishes.
At Muc-Off, we don't do things by halves. Punk Powder delivers the signature cleaning power you've come to expect, but with readily biodegradable ingredients and 92% less packaging than two of our standard 1L bottles it truly is a guilt-free gleam! The fast-dissolving formula means it's ready for use within seconds of water being added, and if you want to go full eco-warrior you can even use collected rainwater! Simply reuse your old Muc-Off bottle or grab one of our new aluminium Bottles for Life and get busy cleaning - it even works with our pressure washer to create an awesome foam for the fastest clean possible.
It's not just the powder that's green and mean (on grime), but the packaging too. It's 100% plastic-free, and each sachet is compostable (certified to EN 13432 standard) and made from renewable raw materials. We've even used vegetable-based inks!
From production right through to the powder itself, sustainability is built in. So you can shred hard, with a clean bike and conscience. Punk Powder is the future of bike cleaning - the future is here!
Product Information:
- Unused sealed sachets should be stored inside the box in a well-ventilated, dry place and protected from moisture, heat and direct sunlight.
- Can be stored for up to 3 years.
- Each sachet contains 30g powder.
- 4 x 30g sachets per carton box.
Features:
- Makes 4x litres of bike cleaner
- 100% plastic free packaging
- Readily biodegradable ingredients
- 100% water free
- Refill your old bottle and help reduce plastic waste
- 92% saving in packaging compared to 4 x 1L bike cleaner
- 100% environmentally friendly ingredients, including plant based raw materials
- Supplied in a compostable sachet and printed with vegetable inks
- FSC recycled card box containing 4 x sachets - that makes 4L of bike cleaner
- Safe on all parts and surfaces including carbon fibre
- Will not harm seals, cables, disc brake pads or rotors
- Alkaline based and free from alcohol, CFCs, EDTA, solvents or acids
- Vegan & vegetarian friendly
- Cruelty free, not tested on animals
- Grab your empty old bottle of Muc-Off. (You may need a pair of adjustable pliers to remove the trigger from the bottle). Or purchase our Bottle for Life.
- Fill up to the shoulders of the bottle with 1 litre of lukewarm water for faster formula activation!
- Carefully cut one corner of the sachet open along the diagonal cut lines.
- You can carefully pour the sachet straight into the top of the bottle. Or using the box, fold the inside of the lid together using the printed lines as a guide and use this as a funnel to pour the powder into your bottle. (Please see our video for full instructions on this.
- Screw your spray trigger back onto the top of the bottle. Ensure it's tight!
- Shake the bottle vigorously for 30-60 seconds to activate the formula. If you notice any undissolved powder simply keep shakin' it!
- Go clean that filthy bike!
